Description
The Lofoten 00-LOF-12-2T is a compact, floor-mounted diesel heater from Dickinson Marine, offered with the 2-turn hot water coil option. It gives dry heat, which Dickinson Marine says helps remove moisture inside the vessel, and it has a small cast iron cooktop for cooking. The body is laser cut from stainless steel.
Features
- Dry heat that Dickinson Marine says helps eliminate moisture inside the vessel.
- Small cast iron cooktop for cooking.
- Laser-cut design in 304 stainless steel.
- Includes a 12v fan for start-up and draft assistance.
- Valve factory set for #2 diesel; valves for kerosene and #1 diesel are also available.
- Hot water options: a 1-turn coil can heat 5-10 gallons; a 2-turn coil can heat 15-20 gallons.
- On sailboats it must face fore or aft. If it faces port or starboard, the valve goes on the side to keep fuel flowing on heels up to 15 degrees.
Specifications
| Model | Lofoten |
| Part number | 00-LOF-12-2T |
| UPC | 814901012396 |
| Heat output | Low: 6500 BTU; High: 16250 BTU |
| Fuel consumption (24hr) | Low: 1.29 gal; High: 3.20 gal |
| Fuel | #2 diesel (factory set); kerosene and #1 diesel valves available |
| Width | 10.75″ |
| Height | 18″ |
| Depth | 17″ |
| Weight | 31 lbs. |
| Material | 304 stainless steel |
| Cooktop | Small cast iron |
| Draft assist fan | 12v |
Compatibility
- Requires 4” diameter chimney parts.
- Ideal chimney length is 6ft with no elbows; minimum 4ft, maximum 8ft.
- For chimneys 6ft or longer, a barometric damper is highly recommended.
- Requires a permanent fresh air vent in the unit’s area.








