Description
The Dickinson Lofoten 00-LOF-12-1T is the one-turn water coil version of Dickinson’s compact floor-mounted diesel heater. It gives dry heat, has a small cast iron cooktop for cooking, and can heat 5-10 gallons of water through its 1-turn hot water coil.
Features
- Compact, budget-friendly diesel heater for floor mounting, with a laser-cut design in 304 stainless steel.
- Produces dry heat, which Dickinson says removes moisture inside the vessel.
- Small cast iron cooktop for cooking.
- The 1-turn hot water coil heats 5-10 gallons of water; Dickinson lists a 2-turn coil for 15-20 gallons.
- Includes a 12v draft assist fan for start-up and draft assistance.
- Valve is factory set for #2 diesel; valves for kerosene and #1 diesel are also available.
- Requires 4” diameter chimney parts; chimney runs 4ft to 8ft, ideal at 6ft with no elbows.
- A permanent fresh air vent is required in the unit’s area.
Installation Notes
For chimneys 6ft or longer, Dickinson highly recommends a barometric damper. In sailboat installations the heater must face fore or aft; for port or starboard facing, mount the valve on the side so fuel flow holds on heels up to 15 degrees.
Specifications
| Part number | 00-LOF-12-1T |
| UPC | 814901012389 |
| Model | Lofoten |
| Type | Diesel floormount heater |
| Hot water coil | 1-turn, for 5-10 gal |
| Width | 10.75″ |
| Height | 18″ |
| Depth | 17″ |
| Weight | 31 lbs. |
| Fuel consumption (24hr), Low | 1.29 gal |
| Fuel consumption (24hr), High | 3.20 gal |
| Heat output, Low | 6500 BTU |
| Heat output, High | 16250 BTU |
| Draft assist fan | 12v |
| Factory fuel setting | #2 diesel |
| Chimney | 4” diameter chimney parts |
| Chimney length | Minimum 4ft, maximum 8ft, ideal 6ft |
| Material | 304 stainless steel |








