Dickinson Newport 00-NEW-12-1T Diesel Bulkhead Heater

$1,060.99 USD

Dickinson Newport 00-NEW-12-1T is a compact diesel bulkhead heater that gives dry heat. It has a 304 stainless steel laser-cut design, a 12v draft assist fan, and a 6500 BTU low to 16250 BTU high heat output.

Ships from manufacturer within 2 weeks

SKU: 00-NEW-12-1T Category: Tags: , , , Brand:

Description

The Dickinson Newport 00-NEW-12-1T is a compact diesel heater that mounts on a bulkhead and produces dry heat. It has a laser-cut 304 stainless steel design and a heat output of 6500 BTU low and 16250 BTU high. The valve is set at the factory for #2 diesel, and a 1-turn hot water coil that can heat 5-10 gallons of water is an option.

Features

  • Mounts on a bulkhead. Dickinson says the dry heat helps remove moisture inside the vessel.
  • Valve is set at the factory for #2 diesel; valves for kerosene and #1 diesel are also available.
  • Laser-cut design in 304 stainless steel.
  • Includes a 12v fan for start-up and draft assistance.
  • Requires 3″ diameter chimney parts, with a chimney length of 4ft minimum and 8ft maximum.
  • A straight run of chimney with no elbows is best. For chimneys 6ft or longer, a barometric damper is recommended.
  • Requires a permanent fresh air vent in the heater’s area.
  • On sailboats, it should face fore or aft. For port or starboard facing, the valve can be mounted to the side so fuel flow stays proper at heels up to 15 degrees.

Specifications

Model number 00-NEW-12-1T
MPN 00NEW121T
UPC 814901012358
Type Diesel bulkhead mount heater
Heat output, low 6500 BTU
Heat output, high 16250 BTU
Fuel consumption (24hr), low 1.29 gal
Fuel consumption (24hr), high 3.20 gal
Factory valve setting #2 diesel
Hot water coil (option) 1-turn, to heat 5-10 gallons of water
Draft assist fan 12v
Chimney diameter 3″
Chimney length 4ft minimum, 8ft maximum
Material 304 stainless steel
Width 8.50″
Height 19.75″
Depth 10.50″
Weight 22 lbs

What’s included

  • 12v draft assist fan