Description
The Dickinson Newport 00-NEW-12-1T is a compact diesel heater that mounts on a bulkhead and produces dry heat. It has a laser-cut 304 stainless steel design and a heat output of 6500 BTU low and 16250 BTU high. The valve is set at the factory for #2 diesel, and a 1-turn hot water coil that can heat 5-10 gallons of water is an option.
Features
- Mounts on a bulkhead. Dickinson says the dry heat helps remove moisture inside the vessel.
- Valve is set at the factory for #2 diesel; valves for kerosene and #1 diesel are also available.
- Laser-cut design in 304 stainless steel.
- Includes a 12v fan for start-up and draft assistance.
- Requires 3″ diameter chimney parts, with a chimney length of 4ft minimum and 8ft maximum.
- A straight run of chimney with no elbows is best. For chimneys 6ft or longer, a barometric damper is recommended.
- Requires a permanent fresh air vent in the heater’s area.
- On sailboats, it should face fore or aft. For port or starboard facing, the valve can be mounted to the side so fuel flow stays proper at heels up to 15 degrees.
Specifications
| Model number | 00-NEW-12-1T |
| MPN | 00NEW121T |
| UPC | 814901012358 |
| Type | Diesel bulkhead mount heater |
| Heat output, low | 6500 BTU |
| Heat output, high | 16250 BTU |
| Fuel consumption (24hr), low | 1.29 gal |
| Fuel consumption (24hr), high | 3.20 gal |
| Factory valve setting | #2 diesel |
| Hot water coil (option) | 1-turn, to heat 5-10 gallons of water |
| Draft assist fan | 12v |
| Chimney diameter | 3″ |
| Chimney length | 4ft minimum, 8ft maximum |
| Material | 304 stainless steel |
| Width | 8.50″ |
| Height | 19.75″ |
| Depth | 10.50″ |
| Weight | 22 lbs |
What’s included
- 12v draft assist fan






