Description
The Victron VDI-16A galvanic isolator, part number GDI000016000, is listed at 16 AMP Max. It blocks low-voltage DC currents that enter the boat through the shore power earth wire, currents that can corrode underwater metals such as the hull, propeller and shaft. It is installed directly behind the boat’s 120V – 230V connection.
Features
- Blocks low-voltage DC currents that enter the boat via the shore power earth wire
- Intended to prevent electrolytic corrosion of underwater metals such as the hull, propeller and shaft
- Two internal diodes wired anti-parallel, so current flows both ways only above a threshold voltage
- Diodes begin to conduct at about 1.4 Vdc
- Installed directly behind the boat’s 120V – 230V connection
- On a higher error voltage in the AC circuit, the diodes pass current and the residual-current device breaks the circuit
Specifications
Key details for the Victron VDI-16A galvanic isolator are listed below.
| Brand | Victron Energy |
| Model | VDI-16A |
| Part number | GDI000016000 |
| Type | Galvanic isolator |
| Maximum current | 16 AMP Max |
| Diode conduction voltage | about 1.4 Vdc |
| Boat connection | 120V – 230V |
| Internal construction | Two diodes connected anti-parallel |






