Victron ITR000802002 Isolation Transformer 8000W 230V

$725.61 USD

Victron ITR000802002 isolation transformer rated 8000W, with 230V input and 240V output for marine shore power. It separates the shore supply from the boat’s wiring, and its soft start helps keep the shore circuit breaker from tripping when plugged in.

Ships from manufacturer within 2 weeks

SKU: ITR000802002 Category: Tags: , Brand:

Description

The Victron ITR000802002 is an 8000W isolation transformer for marine electrical systems. It sits between the shore power connection and the boat’s wiring and removes the electrical continuity between the two. Victron calls it indispensable in professional marine energy systems and says it prevents electrolytic corrosion.

Features

  • Removes the electrical continuity between AC shore power and the vessel
  • Toroidal winding: Victron says it gives quiet operation and high efficiency
  • Soft start circuitry helps keep the shore power circuit breaker from tripping when plugged in
  • Converts a 230V input to 240V output with a 1:1.05 ratio, to offset voltage drops common in marinas
  • Works on 50Hz or 60Hz systems, but cannot convert between the two frequencies
  • Removable neutral to earth link, plus an earth jumper for use when the vessel is out of the water

Specifications

Part number ITR000802002
UPC 8719076075196
Power 8000W
Input voltage 230V
Output voltage 240V for a 230V input (1:1.05 ratio)
Frequency 50Hz or 60Hz systems
Safety class I (provided with a protective earthing terminal)
Soft start Standard feature
Free space for ventilation At least 10cm around the product
Earth link wire core 6mm² (10AWG), 6.3mm spade terminal
Storage temperature -20°C to 60°C

What’s included

  • 1 isolation transformer
  • 1 hanging bracket, for mounting the transformer inside a vessel
  • 1 long yellow/green wire with eye terminals, for case grounding
  • 1 short yellow/green jumper wire with female 6.35 mm spade connectors, to link AC input earth to AC output earth when the vessel is out of the water or in winter storage
  • 1 short yellow/green jumper wire with female 6.35 mm spade connectors, to make the AC output neutral to earth link

Safety and installation

  • Victron says not to expose the product to water, mist, snow, spray or dust, and never to operate it in rain or a dusty environment.
  • Read the installation section of the manual before applying power, and refer all servicing to qualified personnel.
  • It is a safety class I product and needs an uninterruptible safety earth at the AC-in and AC-out terminals.
  • Victron warns that the supplied 6mm² (10AWG) earth wires may not be large enough for some systems’ fault currents, depending on local regulations.
  • Keep at least 10cm of free space around the product for ventilation, and store it in a dry location.