Description
The Victron SCC110020160R is a SmartSolar MPPT 100/20 solar charge controller. It takes power from your solar (PV) panels and stores it in your batteries, aiming for a full charge in as little time as possible while helping keep the battery healthy. It selects 12 V, 24 V or 48 V battery voltage automatically and has built-in Bluetooth.
Features
- Rated charge current of 20 A.
- Selects 12 V, 24 V or 48 V battery voltage automatically.
- MPPT (Maximum Power Point Tracking) monitors the voltage and current from your solar panels so the available power is harvested for storage.
- Victron says it can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or damaged in some other way.
- Built-in Bluetooth pairs with a smartphone or other device through VictronConnect for remote control and monitoring.
- Load output: set the voltage at which a load disconnects to limit battery drain. BatteryLife attempts a 100% recharge every day.
- With an internet connection, the Victron Remote Management Portal (VRM) gives access to the charger from anywhere.
Specifications
| Part number | SCC110020160R |
| Product type | MPPT solar charge controller |
| Manufacturer | Victron Energy |
| Battery voltage (auto select) | 12/24/48 V |
| Rated charge current | 20 A |
| Nominal PV power, 12 V | 290 W |
| Nominal PV power, 24 V | 580 W |
| Nominal PV power, 48 V | 1160 W |
| Max. PV open circuit voltage | 100 V |
| Peak efficiency | 98% |
| Self-consumption, load on | 26 mA (12 V), 20 mA (24 V), 19 mA (48 V) |
| Bluetooth | Built-in |
| Dimensions | 100 x 113 x 60 mm |






