Description
The BatteryProtect BP-220 from Victron, part number BPR000220400, is a battery protection device for 12/24V systems. It disconnects the battery from non-essential loads before the battery is fully discharged or has too little power left to crank the engine. It works across a 6-35 VDC operating range.
Features
- Detects the system voltage automatically, with 12/24V auto ranging.
- Engage and disengage voltages can be set at several levels, and a seven-segment display shows the chosen setting.
- Ultra-low current consumption, which matters for Li-ion batteries, especially after low-voltage shutdown.
- Disconnects the load if DC voltage goes above 16V or 32V, to protect sensitive loads from overvoltage.
- Uses MOSFET switches instead of relays, so there are no sparks. Victron describes it as ignition proof.
- The alarm output activates if battery voltage stays below the disconnect level for more than 12 seconds, so starting the engine does not trigger it.
- The load disconnects 90 seconds after the alarm activates and reconnects 30 seconds after voltage rises above the preset reconnect voltage.
Specifications
| Part number | BPR000220400 |
| Model | BatteryProtect BP-220 |
| Brand | Victron Energy |
| Amperage | 220AMP |
| System voltage | 12/24V, auto ranging |
| Operating voltage | 6-35 VDC |
| Over-voltage disconnect | 16V respectively 32V |
| Alarm output delay | 12 seconds |
| Alarm output max. current | 50 mA |
| Load disconnect delay | 90 seconds after alarm |
| Load reconnect delay | 30 seconds |
Li-ion and charger use
In Li-ion mode, the VE.Bus BMS can control the BatteryProtect BP-220. Victron also says the unit can be used as a charge interrupter between a battery charger and a Li-ion battery, and the manual has the connection diagram.
Warning
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.











