Description
The Victron ASS030550500 is a VE.Direct TX digital output cable for adding dimming to a solar lighting system. It links the TX pin on the VE.Direct connector of an MPPT 75/15 or 100/15 solar charge controller to the PWM light dimming input of an LED driver. Victron says dimming can substantially reduce energy consumption when appropriate, and that lower energy use can reduce overall system cost.
Features
- Intended for solar lighting applications.
- Connects the TX pin on an MPPT 75/15 or 100/15 to the PWM light dimming input of an LED driver.
- Previously called the PWM light dimming cable.
- Requires MPPT firmware V1.15 or higher; older MPPT controllers can be upgraded with VE Power Setup.
- Victron says it can increase light availability when the battery is only partly charged after bad weather.
Specifications
| Part number | ASS030550500 |
| Brand | Victron |
| Previous name | PWM light dimming cable |
| Application | Solar lighting applications |
| MPPT models | 75/10, 75/15 or 100/15 |
| TX pin connection | MPPT 75/15 or 100/15 to the PWM light dimming input of an LED driver |
| Minimum MPPT firmware | V1.15 or higher |
| Computer interface needed | VE.Direct to USB interface ASS030530000 |
| Configuration software | VictronConnect |
Firmware and software requirements
Older MPPT firmware can be upgraded with VE Power Setup, and the latest firmware can be requested from Victron service. A VE.Direct to USB interface (ASS030530000) is needed to connect the MPPT controller to a computer. The MPPT is configured with VictronConnect.
Tested LED drivers
Victron lists these LED drivers as tested with the dimming function:
- RECOM RBD-12
- Glacial Power GP-LD7048-0B
- Glacial Power GP-LD3548-0B
- MEAN WELL LDH-45








