Victron ASS030065011 RJ45 UTP Communication Cable 10m

$18.47 USD

Victron ASS030065011 RJ45 UTP cable, 10 meters (32.81 feet) long, with factory-terminated RJ45 connectors on both ends. Straight-through wiring for supported VE.Bus and VE.Can links, not a crossover cable.

Ships from manufacturer within 2 weeks

SKU: ASS030065011 Category: Tags: , , Brand:

Description

The Victron ASS030065011 is a 10-meter RJ45 UTP communication cable for Victron systems that call for a standard straight-through lead. It is 10 meters (32.81 feet) long and has factory-terminated RJ45 connectors on both ends. The cable is listed for VE.Bus and VE.Can links between inverter/chargers, control devices and GX units installed in separate spaces.

Features

  • Factory-terminated RJ45 connectors on both ends, so no field crimping is needed.
  • Straight-through wiring; this is not a crossover cable.
  • Eight-conductor unshielded twisted-pair (UTP) construction.
  • 10 meters (32.81 feet) long, for routes between separate bays, rooms or cabinets.
  • Made for VE.Bus and VE.Can links where a standard RJ45 UTP cable is specified.
  • Uses RJ45 plugs, not the smaller VE.Direct connector, so it is not a VE.Direct cable.

Specifications

Manufacturer Victron Energy
Part number / SKU ASS030065011
UPC / GTIN 8719076071488
Product type RJ45 UTP communication cable
Cable length 10 meters / 32.81 feet / approx. 33 feet / 393.7 inches
Connector type RJ45 male connectors on both ends
Cable construction 8-conductor UTP (unshielded twisted pair)
Wiring format Straight-through; not a crossover cable
Primary networks VE.Bus and VE.Can where a standard RJ45 UTP cable is specified
Legacy network VE.Net, where still applicable; VE.Net is deprecated

Compatibility

  • VE.Bus links for MultiPlus, Quattro and compatible inverter/charger units.
  • Digital Multi Control, Inverter Control and MK3-USB interfaces.
  • Supported VE.Can device-to-GX connections.
  • VE.Net products where still applicable; VE.Net is deprecated.

Before you connect

Matching RJ45 plugs do not guarantee matching wiring. Check the network type, port label, cable pinout, device firmware, CAN profile and termination in the Victron and battery manuals before connecting anything.

For VE.Can, terminate both ends of the network with the correct VE.Can terminators. Do not install VE.Can terminators in VE.Bus ports. A managed lithium battery may require a specially pinned CAN-bus BMS cable instead of this standard cable.

Test the full route before closing walls, panels or equipment covers. Keep the cable away from sharp edges and high-heat surfaces, and do not pull it by the RJ45 plug.