Description
Fiber Tek MEKP Catalyst is an organic peroxide, methyl ethyl ketone peroxide, that starts the cure of polyester resins and gelcoats. It comes in 15ml, 60ml, 250ml, 500ml and 1 Liter sizes, and the resin or gelcoat will not cure without it. Use the resin quantity table and catalyst chart below to match the amount to your job.
Features
- Organic peroxide that sets off the cure of polyester resins and gelcoats.
- The resin or gelcoat must be catalyzed with it, or it will not cure.
- Five sizes: 15ml, 60ml, 250ml, 500ml and 1 Liter.
- The catalyst chart gives 10, 15 or 20 ml per litre (or drops per oz.) for working temperatures from 10°C to 25°C.
- Working time is approximately 25% of the cure times in the chart.
Specifications
| Chemical | Methyl Ethyl Ketone Peroxide |
| Use | Starts the cure of polyester resins and gelcoats |
| Sizes | 15ml, 60ml, 250ml, 500ml, 1 Liter |
| Working time | Approximately 25% of the cure times in the catalyst chart |
Resin quantities for the full size range
| Catalyst Size | Resin Size |
| 15ml | 1 Liter |
| 60ml | 4 Liter |
| 250ml | up to 5 Gallon |
| 500ml | 2 x 5 Gallon |
| 1 Liter | 4 x 5 Gallon |
| 3.63kg | 1 Drum |
Catalyst chart
Cure times for polyester resins and gelcoats at each catalyst volume. Avoid working in extreme temperatures or direct sunlight.
| Catalyst Volume | 25°C | 20°C | 15°C | 10°C |
| 10 ml per litre or 10 drops per oz. | 30 min. | 2 hr. | 4 hr. | — |
| 15 ml per litre or 15 drops per oz. | — | 30 min. | 2 hr. | 4 hr. |
| 20 ml per litre or 20 drops per oz. | — | — | 40 min. | 2 hr. |
Use
Designed for catalyzing polyester resins and gelcoats.
Safety warning
WARNING: MEKP Catalyst is a hazardous substance. Use with extreme caution. Contact with eyes may cause blindness. In case of contact, flush with water, consult physician immediately. Vapour is harmful, use adequate ventilation during application.








