Victron Energy VM-3P5A Energy Meter with Ethernet and VE.Can

$150.52 USD

Victron Energy VM-3P5A energy meter (REL200320100) for single-phase, split-phase and three-phase AC systems. It uses 5 A current transformers, not included, and has Ethernet and VE.Can ports for a GX device.

Ships from manufacturer within 2 weeks

SKU: REL200320100 Category: Tags: , Brand:

Description

The Victron Energy VM-3P5A is an energy meter that measures power and energy in single-phase, split-phase and three-phase AC systems. It is designed for standard 5 A current transformers, which are not included, so the measuring range can be matched to your system. It connects to a GX device, such as a Cerbo GX or Ekrano GX, through its Ethernet and VE.Can ports.

Features

  • Measures power and energy in single-phase, split-phase and three-phase AC systems.
  • Uses 5 A current transformers, which are not included.
  • Can be set as a grid meter, PV inverter meter, generator meter or AC load meter.
  • Configurable energy registration method: vector, arithmetic or absolute.
  • Monitors electrical parameters, including line-to-neutral and line-to-line voltage and power factor.
  • Plug and play as a grid meter; VictronConnect is needed to change the role or the current transformer primary rating.
  • Status LED, which can be configured as an energy pulse output.
  • Typical measurement points: distribution board, PV inverter, generator, inverter or inverter/charger, and grid meter in an ESS system.

Specifications

Part number REL200320100
Model VM-3P5A
Supported AC systems Single-phase, split-phase and three-phase
Current connection Via current transformers (not included)
Rated current 5 A
Input voltage range, line to neutral 85 to 265 V AC
Input voltage range, line to line 150 to 460 V AC
Frequency 50Hz or 60Hz, selectable
Consumption (W) 1.85 W
Consumption (VA) 3.5 VA
Refresh rate 100 ms
Ethernet port One RJ45 connector, Modbus UDP
VE.Can port Two RJ45 connectors
Voltage connection terminal Screw terminals 1,0 to 2,5 mm² (22 to 12 AWG)
Power type Self-powered via N-L1-L2-L3
Operating temperature range -10 to 55 °C
Storage temperature range -20 to 70 °C
Maximum humidity (non-condensing) 90 %
Altitude 2,000 m
Indoor or outdoor use Indoor only

What’s included

  • VE.Can terminators
  • Pluggable screw terminals for the current transformers

Not included: 5 A current transformers, which must be bought separately.

Fusing requirement

The VM-3P5A has no integrated fuse. External overcurrent protection must be installed at each of the four voltage measurement inputs: N, L1, L2 and L3, with a 500mA fuse at each input.