Description
Victron BAM030710100 is the BMV-710H Smart battery monitor, with a supply voltage range of 60 – 385 VDC. It works out a battery’s state of charge and keeps count of the ampere hours consumed by integrating the current flowing into and out of the battery. Bluetooth is built in, so a phone or tablet can read the monitored values through the VictronConnect app.
Features
- Shows battery voltage, current, power, ampere-hours consumed and state of charge
- Shows the remaining time at the current rate of discharge
- Programmable visual and audible alarm
- Programmable relay that can switch off non-critical loads or run a generator when needed
- 500 A quick connect shunt and connection kit, with shunt selection capability up to 10,000 amps
- VE.Direct communication port
- Keeps a long log of historical events for reviewing usage patterns and battery health
- Wide input voltage range of 6.5 – 95V and current measurement resolution of 10 mA (0.01A)
Specifications
Specifications for the Victron BAM030710100 are below. Accuracy figures are given with a 500 A shunt.
| Part number | BAM030710100 |
| Model | BMV-710H Smart |
| Supply Voltage Range | 60 – 385 VDC |
| Input Voltage Range | 6.5 – 95V |
| Battery Capacity (Ah) | 1 – 9999 Ah |
| Current Draw, Back Light Off | < 4mA |
| Low Current Consumption | 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V |
| Current Measurement Resolution | 10 mA (0.01A) |
| Accuracy of Current Measurement | ± 0.4% |
| Accuracy of Voltage Measurement | ± 0.3% |
| Shunt (included) | 500A / 50mV |
| Shunt Selection Capability | Up to 10,000 amps |
| Relay | 60V / 1A normally open (function can be inverted) |
| VE.Direct Communication Port | Yes |
| Operating Temperature Range | -40 +50°C (-40 – 120°F) |
| Installation | Flush mount |
| Front diameter | 63mm |
| Front bezel | 69 x 69 mm (2.7 x 2.7 inch) |
| Body diameter and depth | 52 mm (2.0 inch) and 31 mm (1.2 inch) |
| Shunt connection bolts | M10 (0.3937 inch) |
| Protection Category | IP55 (not intended for outdoor use) |
| Safety | EN 60335-1 |
| Emission / Immunity | EN 55014-1 / EN 55014-2 |
| Automotive | ECE R10-4 / EN 50498 |
What’s included
- Round head unit
- Square bezel overlay
- Securing ring for rear mounting and screws for front mounting
- 10 meter 6 core UTP cable with RJ12 connectors
- Battery cable (2m) with a 1 Amp slow blow fuse for the ‘+’ connection
- 500 A/50 mV shunt, housed in a special enclosure because of the high voltage application
Not included / sold separately: the optional temperature sensor (ASS000100000). The page says the smartphone app needs a Bluetooth Smart Dongle, which is not in the list above.






