Description
Victron ASS070200100 is a cable for the Smart BMS CL 12-100 to MultiPlus. It lets MultiPlus 500VA-1600VA, MultiPlus Compact 800VA-2kVA and MultiPlus-II inverters be used with BMS products that have no VE.Bus interface. The black and red wires connect to the MultiPlus remote on/off connector, and the terminals depend on the model.
Features
- Connects MultiPlus 500VA-1600VA, MultiPlus Compact 800VA-2kVA and MultiPlus-II models to BMS products with no VE.Bus interface.
- The Load/Charge Disconnect outputs of the Smart BMS CL 12-100 can control the MultiPlus.
- Those Load/Charge Disconnect outputs must be in the High state for the MultiPlus to operate.
- On MultiPlus 500VA-1200VA models, the black wire goes to the ON terminal and the red wire to the (+) terminal.
- On MultiPlus Compact 800VA-2kVA models, the black wire goes to the middle terminal and the red wire to the right (IN) terminal.
- On MultiPlus-II models, the black wire goes to the lower (-) terminal and the red wire to the upper (+) remote on-off terminal.
- After shutdown from low battery voltage, run the alternator or use a battery charger on the BMS primary side to reset the system.
Specifications
| Brand | Victron Energy |
| Part number | ASS070200100 |
| UPC | 8719076051183 |
| BMS link | Smart BMS CL 12-100 and other BMS products with no VE.Bus interface |
| MultiPlus models | 500VA-1600VA, Compact 800VA-2kVA, MultiPlus-II |
| Wire colours | Black and red |
| Connects to | Remote on/off connector of the MultiPlus |
Check the model of your MultiPlus against the wiring steps above before you order Victron ASS070200100.






