Victron ASS070200100 Cable for Smart BMS CL 12-100 to MultiPlus

$13.47 USD

Victron ASS070200100 is a cable that connects MultiPlus 500VA-1600VA, MultiPlus Compact 800VA-2kVA and MultiPlus-II inverters to BMS products with no VE.Bus interface, such as the Smart BMS CL 12-100.

Ships from manufacturer within 2 weeks

SKU: ASS070200100 Category: Tags: , Brand:

Description

Victron ASS070200100 is a cable for the Smart BMS CL 12-100 to MultiPlus. It lets MultiPlus 500VA-1600VA, MultiPlus Compact 800VA-2kVA and MultiPlus-II inverters be used with BMS products that have no VE.Bus interface. The black and red wires connect to the MultiPlus remote on/off connector, and the terminals depend on the model.

Features

  • Connects MultiPlus 500VA-1600VA, MultiPlus Compact 800VA-2kVA and MultiPlus-II models to BMS products with no VE.Bus interface.
  • The Load/Charge Disconnect outputs of the Smart BMS CL 12-100 can control the MultiPlus.
  • Those Load/Charge Disconnect outputs must be in the High state for the MultiPlus to operate.
  • On MultiPlus 500VA-1200VA models, the black wire goes to the ON terminal and the red wire to the (+) terminal.
  • On MultiPlus Compact 800VA-2kVA models, the black wire goes to the middle terminal and the red wire to the right (IN) terminal.
  • On MultiPlus-II models, the black wire goes to the lower (-) terminal and the red wire to the upper (+) remote on-off terminal.
  • After shutdown from low battery voltage, run the alternator or use a battery charger on the BMS primary side to reset the system.

Specifications

Brand Victron Energy
Part number ASS070200100
UPC 8719076051183
BMS link Smart BMS CL 12-100 and other BMS products with no VE.Bus interface
MultiPlus models 500VA-1600VA, Compact 800VA-2kVA, MultiPlus-II
Wire colours Black and red
Connects to Remote on/off connector of the MultiPlus

Check the model of your MultiPlus against the wiring steps above before you order Victron ASS070200100.