Dickinson 20-002 Fuel Pump & Regulator, 12V Low Pressure (Over 6 Feet)

$313.17 USD

Dickinson 20-002 12V low pressure fuel pump with an attached regulator, built on the FRD-4 Walbro impulse pump. It runs at 6-9 psi and includes 3/8” flare fittings. Dickinson says it suits lifts and runs more than approx. 6ft.

Ships from manufacturer within 2 weeks

Description

The Dickinson 20-002 fuel pump is a 12V low pressure unit built on an impulse FRD-4 Walbro pump, with a low pressure regulator attached. It runs continuously at 6-9 psi until it reaches the regulator. Dickinson says it works better pulling fuel than pushing it to a heater or stove, and it is best for lifts and runs more than approx. 6ft.

Features

  • Dickinson 20-002 fuel pump: 12V low pressure impulse pump built on the FRD-4 Walbro pump.
  • Runs continuously at 6-9 psi until it reaches the attached low pressure regulator.
  • Dickinson says it works better pulling fuel than pushing it to a heater or stove.
  • Dickinson stove and heater input pressure should be 3 psi.
  • Best for lifts and for runs more than approx. 6ft.
  • 3/8” flare fittings included.

Specifications

Brand Dickinson
Part number 20-002
UPC 814901012198
Voltage 12V
Pump type Impulse FRD-4 Walbro pump
Regulator Low pressure regulator, attached
Operating pressure 6-9 psi
Recommended input pressure for Dickinson stoves and heaters 3 psi
Fittings 3/8” flare
Best for Lifts and runs more than approx. 6ft

What’s included

  • 3/8” flare fittings.

“