Description
The Dickinson 20-002 fuel pump is a 12V low pressure unit built on an impulse FRD-4 Walbro pump, with a low pressure regulator attached. It runs continuously at 6-9 psi until it reaches the regulator. Dickinson says it works better pulling fuel than pushing it to a heater or stove, and it is best for lifts and runs more than approx. 6ft.
Features
- Dickinson 20-002 fuel pump: 12V low pressure impulse pump built on the FRD-4 Walbro pump.
- Runs continuously at 6-9 psi until it reaches the attached low pressure regulator.
- Dickinson says it works better pulling fuel than pushing it to a heater or stove.
- Dickinson stove and heater input pressure should be 3 psi.
- Best for lifts and for runs more than approx. 6ft.
- 3/8” flare fittings included.
Specifications
| Brand | Dickinson |
| Part number | 20-002 |
| UPC | 814901012198 |
| Voltage | 12V |
| Pump type | Impulse FRD-4 Walbro pump |
| Regulator | Low pressure regulator, attached |
| Operating pressure | 6-9 psi |
| Recommended input pressure for Dickinson stoves and heaters | 3 psi |
| Fittings | 3/8” flare |
| Best for | Lifts and runs more than approx. 6ft |
What’s included
- 3/8” flare fittings.
“






