Dickinson Antarctic Diesel Heater 00-ANT Floormount

Price range: $1,155.82 USD through $1,164.75 USD

The Dickinson Antarctic diesel heater, part 00-ANT, is a compact floor-mounted diesel heater in 304 stainless steel that gives dry heat. It is offered with a one-turn or two-turn hot water coil, and it needs 3” diameter chimney parts.

SKU: 00-ANT-12 Category: Tags: , , , Brand:

Description

The Dickinson Antarctic diesel heater, part 00-ANT, is a compact diesel heater designed for floor mounting. It gives comfortable, dry heat and is built from laser-cut 304 stainless steel. Dickinson describes it as small and budget-friendly, and it is offered with either a one-turn or a two-turn hot water coil option.

Features

  • Produces dry heat to eliminate moisture inside the vessel.
  • Laser-cut design in 304 stainless steel.
  • Includes a 12v fan for start-up and draft assistance. Dickinson says the fan can be converted to 24v if requested when ordering.
  • Valve is factory set for #2 diesel; valves for kerosene and #1 diesel are also available.
  • Hot water coil options: a 1-turn coil can heat 5-10 gallons of water, and a 2-turn coil can heat 15-20 gallons.
  • Requires 3” diameter chimney parts and a permanent fresh air vent in the unit’s area.
  • For chimneys 6ft or longer, a barometric damper is highly recommended.
  • Sailboat installation: must face fore or aft. For port or starboard facing, mount the valve on the side, especially on heels up to 15 degrees.

Specifications

Part number 00-ANT
Width 13″
Height 25″
Depth 14″
Weight 27 lbs.
Heat output, low 6500 BTU
Heat output, high 16250 BTU
Fuel consumption (24hr), low 1.29 gal
Fuel consumption (24hr), high 3.20 gal
Chimney parts 3” diameter
Chimney length Minimum 4ft, ideal 6ft with no elbows, maximum 8ft
Draft assist fan 12v
Factory fuel setting #2 diesel
Hot water coil options 1-turn (heats 5-10 gallons of water) or 2-turn (heats 15-20 gallons)

Additional information

Size

1, 2