Description
The SmartSolar MPPT 75/10 is a solar charge controller that sits between your solar panels and your batteries and manages the charge. Victron says it keeps harvesting power from panels in partially shaded conditions. This version is rated at 10 A and handles 12V and 24V battery systems, with a load output for powering devices directly.
Features
- Rated charge current of 10 A and a maximum efficiency of 98%.
- One MPPT tracker, with a maximum PV open circuit voltage of 75 V and a maximum PV short circuit current of 13 A per tracker.
- Multi-stage adaptive charge algorithm that moves between bulk, absorption and float stages, with adjustable charge voltages.
- Load output with automatic load disconnect; Victron says the BatteryLife algorithm extends battery life.
- Bluetooth and VE.Direct data communication, with the VictronConnect app for setup and real-time monitoring.
- Optional Smart Battery Sense temperature sensor.
Specifications
| Part number | SCC075010060R |
| UPC/EAN | 8719076040798 |
| Battery voltage | 12V / 24V |
| Rated charge current | 10 A |
| Maximum PV open circuit voltage | 75 V |
| Maximum PV short circuit current per tracker | 13 A |
| Number of trackers | 1 |
| Nominal PV power at 12 V | 145 W |
| Nominal PV power at 24 V | 290 W |
| Maximum efficiency | 98 % |
| Max continuous load current | 15 A at 12V, 15 A at 24V |
| Low voltage load disconnect | 11.1V / 22.2V or 11.8V / 23.6V or Battery Life algorithm |
| Low voltage load reconnect | 13.1V / 26.2V or 14V / 28V or Battery Life algorithm |
| Charge voltage absorption | 14.4V / 28.8V (adjustable) |
| Charge voltage float | 13.8V / 27.6V (adjustable) |
| Temperature compensation | -16 mV/°C at 12V, -32 mV/°C at 24V |
| Temperature sensor | Optional (Smart Battery Sense) |
| Data communication | Bluetooth, VE.Direct |
| Protections | Automatic load disconnect, excessive temperature, output short-circuit, PV reverse polarity |
| Operating temperature range | -30 to 60 °C |
| Protection category | IP22 (connection area), IP43 (electronic components) |
| Terminals | Screw terminals 6 mm² (10 AWG) for PV, load and battery connections |
| Dimensions | 113 mm wide, 100 mm high, 40 mm deep |
| Weight | 0.5 kg |
| Colour | Blue (RAL 5012) |
| Safety standards | CSA C22.2, UL 1741, EN-IEC 62109-1 |
Compatibility
Victron says the controller is compatible with lithium, AGM, gel and flooded batteries. The VE.Direct port connects to a communication centre so the system can be managed in the VRM portal. Victron’s Solar and Wind priority feature requires an inverter/charger and GX device.






