Description
The Victron SmallBMS NG (BMS400100300) is a battery management system designed for Victron Lithium NG batteries. It monitors the batteries, manages charge and load disconnects, and sends low-voltage pre-alarms. It is positioned as an alternative to the VE.Bus BMS NG for systems that do not need integration with Victron inverter/chargers.
Features
- Load disconnect output drives the remote on/off input of loads such as a BatteryProtect or inverter, to prevent deep discharge.
- Charge disconnect output drives the remote on/off port of chargers, such as the Smart IP43 Charger, to prevent overvoltage.
- Pre-alarm output gives early warning of low battery voltage before loads are disconnected, and can drive a relay, LED or buzzer.
- Remote on/off control lets an external input control both the load and charge disconnect outputs.
- Built-in Bluetooth connects directly to all lithium NG batteries in the system for central monitoring in VictronConnect.
- It receives current and state of charge data directly from the batteries, so no separate SmartShunt is needed.
- A blue LED shows Bluetooth status and a red LED shows warnings and errors.
Specifications
| Part number | BMS400100300 |
| Model | SmallBMS NG |
| Brand | Victron Energy |
| Battery type | Victron Lithium NG batteries |
| System voltage | 12V, 24V and 48V |
| Maximum batteries | 50 in 12V or 24V banks; 25 in 48V banks |
| Maximum storage | 192 kWh (12V), 384 kWh (24V), 128 kWh (48V) |
| Connectivity | Built-in Bluetooth |
| Outputs | Load disconnect, charge disconnect, pre-alarm |
| LED indicators | Blue (Bluetooth status); red (warnings and errors) |
Compatibility
The Victron SmallBMS NG is designed for Victron Lithium NG batteries and is not compatible with lithium smart batteries.
- Not suitable for use with VE.Bus inverter/chargers such as MultiPlus and Quattro.
- Multiple Lynx Smart BMS units can be paralleled to expand capacity and ensure redundancy.






