Description
Skylla-i 24/100(3) 230V is a 24 V battery charger from Victron Energy, with a 230V AC input and three fully rated charge outputs. Victron gives a recommended battery capacity range of 500 to 10,000 Ah. It has an aluminium enclosure and an adaptive 7-stage charge algorithm.
Features
- Adaptive 7-stage charge algorithm with variable absorption time for lead-acid batteries
- BatterySafe mode prevents damage from excessive gassing
- Storage mode means less maintenance and ageing when the battery is not in use
- NMEA 2000 CANbus connection through VE.Can, with synchronised parallel operation
- PowerControl lets you set a maximum shore power
- Remote port can be connected to a Li-Ion BMS; Victron lists it as Li-ion (LiFePO4) ready
- Victron says it is smaller and lighter than similar models
Specifications
| Part number | SKI024100002 |
| UPC | 8719076026259 |
| Nominal battery voltage | 24 V |
| Charge current, house battery (nominal value) | 100 A |
| Number of fully rated charge outputs | 3 |
| Charge algorithm | Adaptive, 7-stage |
| Charge voltage, absorption | 28.8 V |
| Charge voltage, float | 27.6 V |
| Charge voltage, storage | 26.4 V |
| Recommended battery capacity range | 500 to 10,000 Ah |
| AC input voltage | 230V |
| AC input voltage range | 185 to 265 V |
| AC input frequency range | 45 to 65 Hz |
| Maximum AC input current at 180 VAC | 20 A |
| DC input voltage range | 180 to 350 VDC |
| AC connection terminal type | Screw-clamp 10 mm² (AWG 7) |
| Battery connection terminal type | M8 bolts |
| Temperature sensor | Included |
| Protections | Output short-circuit, over temperature, battery reverse polarity (fuse) |
| Operating temperature range | -20 to 60 °C |
| Enclosure material | Aluminium |
| Enclosure colour | Blue (RAL 5012) |
| Width | 250 mm |
| Depth | 150 mm |
| Height | 405 mm |
| Weight | 7 kg |
| Protection category | IP21 |
| Safety standards | EN-IEC 60335-1, EN-IEC 60335-2-29 |
Warranty and support
Victron Energy describes a 5-year standard warranty and global repair service for this charger.






