Description
The Victron SKI024080002 is a Skylla-i 24/80(3) 230V marine battery charger. It has three isolated outputs that share a maximum of 80 Amps of charging current, takes a 230V AC input and gives a 24V DC output. It suits lead-acid batteries and is listed as Li-ion (LiFePO4) ready.
Features
- Three isolated outputs share a maximum charging current of 80 Amps.
- Variable absorption time adjusts the absorption phase to the depth of the previous discharge.
- BatterySafe mode limits the voltage rise rate once gassing voltage is reached, to prevent battery damage from excessive gassing.
- Storage mode starts after 24 hours of inactivity and lowers the float voltage to reduce maintenance when the battery is not in use.
- A built-in NMEA 2000 CAN-bus interface reports charging status, current, voltage and battery condition to connected marine electronics.
- PowerControl lets you set a maximum shore power draw.
- Multiple units can be synchronized with RJ45 cables for larger installations.
- An integrated battery temperature sensor lowers the charge voltage as temperature rises.
Specifications
| Brand and part number | Victron SKI024080002 |
| Model | Skylla-i 24/80(3) 230V |
| Maximum charging current | 80 Amps (distributed across 3 outputs) |
| Output voltage | 24V DC |
| Output configuration | 3 isolated outputs |
| Input voltage | 230V AC (185-265V AC range) |
| Frequency range | 45-65Hz |
| Operating temperature | -20°C to +50°C |
| Humidity rating | Up to 95% non-condensing |
Compatibility
Suits AC and DC supply and can also be used as a power supply, according to the dealer pages. Confirm against the maker’s page before publishing.
Using the SKI024080002 part number to search will find this model.
Please contact the seller for any returns, repairs or support issues related to this product.
Remember to check your battery type and charging requirements before installation.








