Description
Victron SCC125110412 is a SmartSolar MPPT solar charge controller that takes power from a solar array and charges 12, 24, or 48V battery banks. It accepts a PV array rated 150 or 250 Volt Voc and sets its charge current between 70 and 100A, depending on the model. Charge settings are fully programmable, including for lead-acid and lithium batteries.
Features
- Victron SCC125110412 accepts a PV array of 150 or 250 Volt Voc.
- Detects and charges 12, 24, or 48V battery banks automatically, at 70 to 100A depending on the model.
- Charge settings can be programmed for different battery chemistries, such as lead-acid and lithium.
- Victron says it can work with a battery at 0 Volts, as long as its cells are not permanently sulfated or otherwise harmed.
- Set up and monitor over Bluetooth with the VictronConnect App, including battery and PV voltage and current, and historical data.
- VE.Can CAN bus ports link additional VE.Can SmartSolar chargers; a VE.Direct port handles single-unit monitoring or streetlight control.
- Remote on/off connector can be controlled externally by a third-party device, such as a lithium battery.
- An optional plug-in LCD display/control shows live data, set-up and management from the face of the device.
Specifications
| Brand | Victron Energy |
| Manufacturer Part Number | SCC125110412 |
| UPC | 8719076055662 |
| Battery voltage | 12, 24, or 48V |
| PV input (Voc) | 150 or 250 Volt Voc |
| Charge current | 70 to 100A depending on the model |
| Minimum battery voltage | 0 Volts |
| Remote control | Bluetooth, VictronConnect App |
| Communication ports | VE.Can (CAN bus), VE.Direct |
| Remote on/off | Yes |
| Weight | 12.4 lb |
| Length | 34.1 cm |
| Width | 29.8 cm |
| Height | 16 cm |
Connections and monitoring
- Additional VE.Can SmartSolar chargers, linked in a daisy chain by one RJ45 cable
- A GX monitoring device, which can receive data from connected chargers over a single cable
- Victron Remote Management Portal (VRM), when the GX device is connected to the internet
- GlobalLink 520, which Victron says may allow monitoring where no internet connection is nearby





