Description
The Victron SCC115110411 is a SmartSolar MPPT charge controller that takes energy from your solar panels and uses it to charge your batteries. It is the 150/100-Tr VE.Can model, rated at 100 A, and it works with 12, 24 or 48 V battery systems. Bluetooth is built in, and VE.Can ports let up to 25 controllers run in synchronized parallel operation.
Features
- Rated charge current of 100 A
- Battery voltage of 12/24/48 V with auto select; 36 V is set manually
- Built-in Bluetooth, no dongle needed; setup is done in the VictronConnect app
- VE.Can ports for synchronized parallel operation of up to 25 controllers, or up to 10 units via Bluetooth
- Can send its data to a Victron GX monitoring device over a single cable
- Optional plug-in LCD display/control for live data, setup and management
- Protection against PV reverse polarity, output short circuit and over temperature
- VE.Direct port and a remote on/off connector
Specifications
| Part number (MPN) | SCC115110411 |
| SKU | SCC115110411 |
| Model | SmartSolar MPPT 150/100-Tr VE.Can |
| Rated charge current | 100 A |
| Battery voltage | 12/24/48 V auto select (36 V: manual) |
| Parallel operation | Up to 25 controllers via VE.Can; up to 10 units via Bluetooth |
| Data communication | VE.Can, VE.Direct and Bluetooth |
| Bluetooth | Built in (dongle not needed) |
| Remote on/off | Yes (2 pole connector) |
| Display | Optional LCD display/control |
| Protection | PV reverse polarity, output short circuit, over temperature |
| Operating temperature | -30 to +60 °C (full rated output up to 40 °C) |
| Humidity | 95%, non-condensing |
| Environmental condition | Indoor, unconditioned |
What’s included
- SmartSolar MPPT 150/100-Tr VE.Can charge controller
- User manual
Not listed as included: the optional plug-in LCD display/control.
Compatibility
Daisy-chains with other VE.Can SmartSolar chargers for synchronized operation. Can send its data to a Victron GX monitoring device.






