Description
The Victron SCC010030050 is a BlueSolar PWM charge controller rated at 30 A for 12V and 24V battery systems. It detects the battery voltage automatically and has an LCD display, two 5 V USB outputs and a programmable load output. Its three stage battery charging (bulk, absorption and float) can also be programmed.
Features
- Rated charge current of 30 A, with the battery voltage (12V / 24V) detected automatically.
- Liquid crystal display (LCD).
- Two USB outputs at 5 V, 2 A per port.
- Three stage battery charging (bulk, absorption, float), fully programmable.
- Load output with low voltage and manual disconnect, programmable, with a timer.
- Lighting control function, fully programmable.
- Load output protected against overload and short circuit.
- Reverse polarity protection on the solar panel and/or battery connections.
Specifications
| Part number | SCC010030050 |
| UPC | 8719076046226 |
| Battery voltage | 12V / 24V (automatic detection) |
| Rated charge current | 30 A |
| Charge voltage absorption | 14.4V / 28.8V |
| Charge voltage float | 13.7V / 27.4V |
| Maximum solar voltage | 28V / 55V |
| Low voltage load disconnect | 11.2V / 22.4V |
| Low voltage load reconnect | 12.6V / 25.2V |
| Load output | Manual control + low voltage disconnect + timer |
| USB outputs | 2 ports, 5 V, 2 A per port |
| Self-consumption | 10 mA |
| Overload protection at 130% load | Shutdown after 60 seconds |
| Overload protection at 160% load | Shutdown after 5 seconds |
| Short circuit protection | Immediate shutdown |
| Protections | Battery reverse polarity (fuse), output short-circuit, excessive temperature |
| Temperature sensor | No |
| Connections | Screw terminals 16 mm² (6 AWG) for PV, battery and load |
| Dimensions (H x W x D) | 101 mm x 184 mm x 47 mm |
| Weight | 0.3 kg |
| Protection category | IP20 |
| Colour | Blue (RAL 5012) |
| Operating temperature range | -35 to 60 °C |
| Maximum humidity (non-condensing) | 95 % |
| Safety standards | EN-IEC 60335-1, EN-IEC 62109-1 |
| Emission standards | EN-IEC 61000-6-1, EN-IEC 61000-6-3, ISO 7637-2 |
PV array configurations
Victron lists these PV array configurations for this controller:
- 12V: solar panel with 36 cells.
- 24V: solar panel with 72 cells, or two solar panels with 36 cells in series.






