Description
Victron PIN482300000 is the part number for the Phoenix Inverter Smart, a 48V inverter rated 3000 VA with 230 V output. It runs from a 48 V battery supply and has Bluetooth built in, so its settings can be changed from a tablet or smartphone. Its terminals are more accessible for the installer, and the inverter includes a VE.Direct port and an alarm relay.
Features
- Bluetooth is built in, so the inverter can be set up and configured from a tablet or smartphone.
- Low battery voltage alarm, with low battery voltage cut-off and restart levels.
- Dynamic cut-off: the cut-off level depends on the load.
- ECO mode can be switched on or off, with an adjustable sense level. In standby, the inverter switches on for a short period every 2,5 seconds (adjustable).
- Monitors input and output voltage, load and alarms. The VE.Direct port connects to a computer with a VE.Direct to USB interface cable.
- High start-up power for starting loads such as LED lamp converters, halogen lamps and electric tools.
- Remote on/off through a two pole connector; either the H or L terminal can be switched to battery plus or battery minus.
- Victron says its full bridge plus toroidal transformer design has proven reliability over many years.
- Victron says the inverters resist short circuits and are protected against overheating from overload or high ambient temperature.
Specifications
| Part number | PIN482300000 |
| Brand | Victron |
| Power rating | 3000 VA |
| Continuous power | 2400 W |
| Peak power | 6000 W |
| Battery voltage | 48 V |
| Input voltage range | 37.2 to 68 V DC |
| Output voltage | 230 V |
| Output voltage range | 210 to 245 V |
| Output frequency | 50 Hz or 60 Hz |
| Output waveform | Pure sine wave |
| Bluetooth | Built in |
| VE.Direct communication port | Yes |
| Alarm relay | Yes |
| Remote on/off | Yes |
| ECO mode | Yes, with adjustable sense level |
| Battery connection | M8 bolts |
| AC output connection | Screw terminals |
| Dimensions (H × W × D) | 485 × 285 × 150 mm |
| Weight | 19 kg |
Compatibility
- A VE.Direct to USB interface cable is needed to connect the VE.Direct port to a computer.
- For low power inverters, the Filax Automatic Transfer Switch is recommended; its switchover time is less than 20 milliseconds.
- As an alternative, a MultiPlus with built-in transfer switch can be used.






