Description
The Victron Orion XS 12/12-50A DC-DC battery charger has a 9-17 V input voltage range and a 10-17 V output voltage adjust range. Its input and output current setting range is 1 – 50 A, with a maximum constant short-circuit current of 50 A. Victron lists the protection category as IP65, and the screw terminals take cable up to 4 AWG (21,2 mm²).
Features
- Output voltage can be set with the VictronConnect App, within a 10-17 V adjust range.
- Emergency reverse charge, set in the VictronConnect App up to 25 A, moves charge from the auxiliary battery to the starter battery for 15 minutes.
- A 5-minute settling period follows the reverse charge, during which the engine can be started.
- Continuous output power of 700 W up to 40 °C, a nominal figure at a typical voltage of 14 V.
- Maximum efficiency of 98,5 %.
- Bluetooth Smart connection to the VictronConnect App, plus VE.Smart Networking and VE.Direct (including DVCC).
- Protection category IP65.
Specifications
| Input voltage range | 9-17 V |
| Output voltage adjust range | 10-17 V |
| Output voltage tolerance | +/- 0,25 % (max) |
| Output voltage noise | 10 mV rms |
| Input and output current setting range | 1 – 50 A |
| Maximum constant short-circuit current | 50 A |
| Continuous output power up to 40 °C | 700 W (nominal, at a typical voltage of 14 V) |
| Maximum efficiency | 98,5 % |
| No-load current consumption | < 100 mA |
| Standby current consumption | < 1,5 mA |
| Emergency reverse charge function | Yes, set in the VictronConnect App, up to 25 A |
| Bluetooth power and frequency | +4 dBm, 2402 – 2480 MHz |
| Operating temperature range | -20 to +60 °C (derating 1,5 % per °C above 40 °C) |
| Humidity | 95 % non-condensing |
| Maximum altitude | 2000 m |
| Protection category | IP65 |
| DC connection | Screw terminals |
| Maximum cable cross-section | 4 AWG (21,2 mm²) |
| Weight | 0,330 kg (0,73 lb) |
| Dimensions h x w x d | 137,3 x 123,1 x 40 mm (5,4 x 4,85 x 1,6 inch) |
| Safety standard | IEC 62477-1 |
| EMC standards | EN 300 328, EN 301 489-1, EN 301 489-17, FCC 15B, ICES-003 |
| Automotive directive | ECE R10-6 |
| UPC | 8719076068501 |
Compatibility
- DVCC requires Orion XS firmware v1.03 or later and Venus OS firmware v3.20 or later on the GX device.
- Emergency reverse charge requires Orion XS firmware v1.15 and VictronConnect v6.43 or later.
- VE.Smart Networking receives Vsense, Tsense and Isense data from the wireless network, for example from a SmartShunt, BMV or Smart Battery Sense. Synchronised charging is not supported.
Compliance and Safety Notes
Victron Energy B.V. declares that the Victron Orion XS 12/12-50A DC-DC battery charger complies with Directive 2014/53/EU and S.I. 2017/1206.
The device contains a transmitter with FCC ID SH6MDBT42Q and IC 8017A-MDBT42Q. Victron says the antenna must be installed so that a minimum separation distance of 20cm is kept between the radiator (antenna) and all persons at all times.

















