Victron Orion-TR ORI482441110 DC-DC Converter 48 VDC to 24 VDC 16A Isolated

$178.57 USD

Victron Orion-TR ORI482441110 takes a 40-70 V input and gives a 24.2 V nominal output. It supplies 16 A continuous at 40 °C, and carries IP43 protection when installed with the screw terminals facing down.

Ships from manufacturer within 2 weeks

SKU: ORI482441110 Category: Tags: , , Brand:

Description

Victron Orion-TR ORI482441110 is an isolated DC-DC converter with a 48 VDC input and a 24 VDC output. Its input range is 40-70 V, and it gives 16 A of continuous output at 40 °C. Victron says it is not intended for battery charging.

Features

  • Victron Orion-TR ORI482441110 is an isolated model, with separate input and output (-) leads.
  • The remote on/off terminal can be operated with a low power switch, such as the engine run/stop switch, so no high current switch is needed in the input wiring.
  • Victron says all models are short circuit proof, and an unlimited number of units can be connected in parallel to increase output current.
  • High temperature protection: the output current is reduced at high ambient temperatures.
  • IP43 protection when installed with the screw terminals oriented downward.
  • Screw terminals, and no special tools are needed for installation.
  • Adjustable output voltage, 20-30 V.

Specifications

Model Orion-TR 48/24-16A (380W)
Part number ORI482441110
UPC 8719076038887
Input voltage range 40-70 V
Nominal output voltage 24.2 V
Output voltage adjust range 20-30 V
Continuous output current at nominal output voltage and 40 °C 16 A
Maximum output current (10 S) at nominal output voltage 25 A
Short circuit output current 40 A
Continuous output power at 25 °C 430 W
Continuous output power at 40 °C 380 W
Efficiency 89 %
No load input current < 80 mA
Galvanic isolation 200 VDC between input, output, and case
Operating temperature range -20 to +55 °C (derate 3 % per °C above 40 °C)
Humidity Max. 95 % non-condensing
IP rating IP43 (when installed with the screw terminals oriented downward)
DC connection Screw terminals
Maximum cable cross-section 16 mm² AWG6
Weight 1.6 kg (3.5 lb)
Dimensions (H x W x D) 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
Safety standards EN 60950
Emission standards EN 61000-6-3, EN 55014-1
Immunity standards EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive directive standards ECE R10-5