Victron Orion-TR 24/24-12 Isolated DC-DC Converter 280 W

$112.68 USD

Victron Orion-TR 24/24-12 isolated DC-DC converter, part ORI242428110. It takes 16 to 35 V input, gives a nominal 24.2 V output, and is rated 280 W continuous at 40 °C with 12 A output.

Ships from manufacturer within 2 weeks

SKU: ORI242428110 Category: Tags: , Brand:

Description

Victron Orion-TR 24/24-12 is an isolated DC-DC converter that takes a 24 VDC input and gives a 24 VDC output. Its input range is 16-35 V, and its output voltage can be adjusted from 20 to 30 V. It is rated 280 W continuous at 40 °C and is not intended for battery charging.

Features

  • Galvanic isolation of 200 VDC between input, output and case.
  • Remote on/off terminal: a low-power switch, such as an engine run/stop switch, can control it instead of a high-current switch in the input wiring.
  • An unlimited number of units can be connected in parallel to increase output current.
  • Output current is reduced at high ambient temperatures; operating range is -20 to +55 °C.
  • IP43 protection when installed with the screw terminals oriented downward.
  • Screw terminals; no special tools are needed for installation.
  • Input voltage range of 16-35 V, with under voltage shut down at 14 V and restart at 15 V.
  • Output voltage adjustable from 20 to 30 V.

Specifications

Part number ORI242428110
UPC 8719076035268
Brand Victron Energy
Input voltage range 16-35 V
Nominal output voltage 24.2 V
Output voltage adjust range 20-30 V
Cont. output current at nominal output voltage and 40 °C 12 A
Cont. output power at 40 °C 280 W
Cont. output power at 25 °C 320 W
Maximum output current (10 S) at nominal output voltage 15 A
Short circuit output current 30 A
Under voltage shut down 14 V
Under voltage restart 15 V
Efficiency 89 %
No load input current < 80 mA
Galvanic isolation 200 VDC between input, output, and case
Operating temperature range -20 to +55 °C (derate 3 % per °C above 40 °C)
Humidity Max. 95 % non-condensing
DC connection Screw terminals
Maximum cable cross-section 16 mm² AWG6
Weight 1.3 kg (3 lb)
Dimensions (H x W x D) 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
Protection rating IP43 (when installed with the screw terminals oriented downward)
Safety standards EN 60950
Automotive directive standards ECE R10-5