Description
Victron ORI303050000 is a 50A buck-boost DC-DC converter that charges a 12V or 24V service battery in vehicles with a smart alternator, also called an intelligent dynamo. In Euro 5 and Euro 6 engines, these alternators do not always give the correct charging current while the engine runs, so a DC-DC converter is needed to charge the service battery properly.
Features
- Charges a 12V or 24V service battery in vehicles with a smart alternator or intelligent dynamo.
- Maximum charge current is 50A at 12V and 25A at 24V.
- Built-in ‘engine running’ detection system helps avoid deep discharge of the starting battery.
- A programmable input (D+, CAN bus or (+)15) can activate the converter instead of that detection system.
- Charges the auxiliary battery with a pre-set charge voltage.
- Programmed with a PC application; a USB type A male to USB type B male cable is needed.
- Input and output voltage range of 10-30V, for 12V, 24V or 12/24V systems.
Specifications
| Part number | ORI303050000 |
| Amps | 50A |
| Volts | 12V and 24V |
| Maximum charge current | 12V: 50A; 24V: 25A |
| Input voltage range | 10-30V |
| Output voltage range | 10-30V |
| Under voltage threshold | 10V |
| Min power consumption (power save mode) | 7mA |
| Length | 213mm (8.4″) |
| Width | 120mm (4.7″) |
| Height | 30mm (1.2″) |
Compatibility
Listed for vehicles with a smart alternator or intelligent dynamo, including Euro 5 and Euro 6 engines, to charge a 12V or 24V service battery.






