Description
The Victron MultiPlus-II 48/4k5/55-32 230V is a 48 V inverter charger that combines a sine wave inverter, a battery charger and a transfer switch in one housing. It is aimed at marine, mobile, off-grid and grid-connected energy systems, and at home energy storage systems.
Features
- Continuous inverter output of 4.0 kW at 25 °C, 3.7 kW at 40 °C and 3.0 kW at 65 °C.
- Time-limited power of 4.5 kW for 2 h, with a 7 kW peak for 1 min.
- Battery charger rated up to 55A for a 48 V battery system.
- 32A transfer switch that changes over in less than 20 ms, with UPS-type backup on the main AC output.
- Second AC output for loads that run only when AC input power is present, such as water heaters.
- PowerControl limits the input current drawn from the grid or generator; PowerAssist adds battery power at peak loads.
- Parallel operation of up to six units and three-phase configuration.
- Set up and monitored with VEConfigure software, GX devices and the VRM Remote Management portal.
Specifications
| Part number | PMP482405012 |
| Battery voltage | 48 V |
| Continuous inverter power | 4.0 kW (25 °C); 3.7 kW (40 °C); 3.0 kW (65 °C) |
| Time-limited power | 4.5 kW for 2 h |
| Peak power | 7 kW (1 min) |
| AC output voltage | 230 V AC ±2 % |
| AC output frequency | 50 Hz ±0.1 % (adjustable to 60 Hz) |
| Battery charging current | Up to 55A |
| Transfer switch | 32A |
| Transfer time | Less than 20 ms |
| Maximum efficiency | 95 % |
| Operating temperature | -40 °C to +65 °C (fan-assisted cooling) |
| Protection | Short circuit, overload, over/under voltage, temperature, DC ripple, anti-islanding |
| Battery connection | M8 bolts |
| AC connection | Screw terminals (13 mm² / 6 AWG) |
| Parallel operation | Up to six units |
Compatibility
The Victron MultiPlus-II 48/4k5/55-32 works with off-grid and grid-connected solar systems, alongside solar charge controllers and grid-tie inverters. An optional external AC current sensor or power meter can supply data for managing energy flow.
Monitoring and configuration use GX devices and the VRM Remote Management portal, with VEConfigure software.










