Description
The Victron MultiPlus-II 24/3000/70-32 is a 24V pure sine wave inverter/charger that combines an inverter, a battery charger and an automatic transfer switch in one unit. It is aimed at off-grid solar, marine and mobile power setups, and at compatible energy storage systems. It is designed for 230V AC systems and does not directly replace a North American residential split-phase inverter.
Features
- Pure sine wave inverter rated at 3,000VA, with 2,400W continuous active power at 25°C
- Peak power of 5,500W
- Integrated battery charger with a maximum battery charge current of 70A at up to 25°C ambient
- 32A automatic transfer switch with a transfer time of less than 20ms
- PowerControl limits AC input demand, and PowerAssist adds battery energy when incoming AC power is limited
- Main AC output continues through the inverter when enough battery energy is available; the 32A auxiliary output works only when external AC input is present
- No integrated solar charge controller: solar charging needs compatible external equipment
- Remote monitoring through Victron VRM when a compatible GX device has an internet connection
Specifications
| Part number (MPN) | PMP242305010 |
| Model | MultiPlus-II 24/3000/70-32 |
| Nominal battery voltage | 24V DC |
| Inverter rating | 3,000VA |
| Continuous active power at 25°C | 2,400W |
| Peak power | 5,500W |
| Maximum battery charge current | 70A |
| Transfer switch rating | 32A |
| Transfer time | Less than 20ms |
| AC output | 230V AC, single-phase |
| Output frequency | 50Hz ±0.1%; adjustable to 60Hz |
| DC input voltage range | 19–33V DC |
| AC input voltage range | 187–265V AC |
| AC input frequency | 45–65Hz |
| Maximum AC input current | 32A |
| Zero-load power | 13W |
| Parallel operation | Up to 6 compatible units, subject to Victron configuration requirements |
| Battery connection | M8 bolts |
| AC connection | Screw terminals, 13mm² (6 AWG) |
| Dimensions (H × W × D) | 499 × 268 × 141 mm (approximately 19.65 × 10.55 × 5.55 inches) |
| Enclosure material | Steel |
| Colour | Blue, RAL 5012 |
| Cooling | Fan-assisted |
| Operating temperature | -40°C to +65°C |
Compatibility
The Victron MultiPlus-II 24/3000/70-32 is designed for 230V AC systems. The listed supporting accessories are Victron Cerbo GX, VE.Bus Smart Dongle, Digital Multi Control Panel and MK3-USB interface.
- Bluetooth monitoring needs the optional VE.Bus Smart Dongle; the unit has no integrated Wi-Fi or Bluetooth.
- Solar: compatible with Victron MPPT solar charge controllers and AC-coupled solar inverters; solar panels cannot connect directly to the PV input.
- Lithium: can operate with compatible lithium battery systems when properly configured with the required battery management and communication equipment; check with the battery maker.
- Expansion: up to 6 compatible units in parallel, or three matched units for three-phase, subject to Victron configuration requirements.
- An optional external AC current sensor rated 50A or 100A is available.
Monitoring accessories and communication interfaces come separately unless a bundle includes them.






