Victron Lynx Smart BMS 500 NG (M10) Battery Management System

$675.25 USD

The Victron Lynx Smart BMS 500 NG (M10), part LYN034160310, is a battery management system for Victron Lithium NG batteries. Its main safety contactor is rated 500 A continuous, and it supports Bluetooth and VE.Can monitoring.

Ships from manufacturer within 2 weeks

SKU: LYN034160310 Categories: , Tags: , , , , Brand:

Description

The Victron Lynx Smart BMS 500 NG (M10) is a battery management system (BMS) designed for Victron Lithium NG batteries, which use lithium iron phosphate (LiFePO4) technology. It can manage battery banks wired in series, in parallel or in series/parallel for 12V, 24V or 48V systems, with up to 50 batteries in one system. It carries a built-in 500 A contactor and integrates with other M10 Lynx products.

Features

  • Built-in 500 A contactor, usable as a remote-controllable main system switch.
  • Pre-charge circuit limits high inrush currents when connecting capacitive loads such as inverters, with no external pre-charging device.
  • Works as a secondary safety system that protects the battery if the primary controls (ATC, ATD, and/or DVCC) fail.
  • Bluetooth monitoring and control via the VictronConnect App, or VE.Can with GX devices (Cerbo GX, Ekrano GX) and the VRM portal.
  • Built-in battery monitor reports state of charge, voltage, current and historical data in real time.
  • Programmable relay works as an alarm relay (with the pre-alarm) or controls an alternator via its external regulator (ignition cable).
  • AUX terminal supplies 1.1 A at system voltage for loads such as a GX device after BMS shutdown.
  • Monitors fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices, and raises alarms for blown fuses.

Specifications

Part number LYN034160310
Continuous contactor rating 500 A continuous
Peak contactor rating 600 A for 5 minutes
Battery voltage range 9 – 60 VDC
Maximum input voltage 75 VDC
Supported system voltages 12, 24, or 48V
Reverse polarity protection No
Busbar M10 (Torque: 33 Nm)
Busbar material Tinned copper
Busbar dimensions (H x W) 8 x 30 mm
VE.Can RJ45
AUX output maximum current 1.1 A continuous, protected by resettable fuse
Alarm relay (SPDT) maximum current 2 A at 60 VDC
Power consumption, OFF mode 0.3 mA for all system voltages
Power consumption, standby mode Approximately 0.6 W (50 mA at 12 V)
Enclosure material ABS
Enclosure dimensions (H x W x D) 190 x 180 x 80 mm
Unit weight 1.9 kg
Protection class IP22
Humidity Max. 95 % (non-condensing)
Operating temperature range -40 °C to +60 °C
Storage temperature range -40 °C to +60 °C
Safety standard EN-IEC 63000:2018
EMC standard EN-IEC 61000-6-3:2007/A1:2011/AC:2012

Compatibility

  • The Victron Lynx Smart BMS is designed specifically for Victron Lithium NG batteries, which come in 12.8 V, 25.6 V and 51.2 V variants.
  • Its M10 busbar can be combined with all M10 Lynx products.
  • Compatible Victron inverter/chargers, the Orion XS 12/12-50A DC-DC battery charger, and solar charge controllers are controlled automatically via a connected GX device and DVCC.
  • ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off port.
  • Integration into marine networks via NMEA 2000 requires a VE.Can to NMEA 2000 micro-C male cable.