Victron LYN034170310 Lynx Smart BMS 1000 NG Battery Management System

$900.62 USD

Victron LYN034170310 Lynx Smart BMS 1000 NG battery management system for Victron Lithium NG batteries. It carries 1000 A continuous and 1200 A peak for 5 minutes, supports up to 50 batteries, and monitors over Bluetooth or GX devices.

Ships from manufacturer within 2 weeks

SKU: LYN034170310 Category: Tags: , , , , Brand:

Description

Victron LYN034170310 is the Lynx Smart BMS 1000 NG, a battery management system (BMS) for Victron Lithium NG batteries (LiFePO4). It has a built-in 1000 A main contactor that can work as a remote-controllable main system switch. Monitoring runs through the VictronConnect app over Bluetooth, or through a GX device.

Features

  • Built-in 1000 A main contactor with a 1200 A peak rating for 5 minutes
  • Pre-charge circuit limits inrush current when connecting capacitive loads such as inverters, so no external pre-charger is needed
  • Built-in battery monitor reports state of charge, voltage, current and status in real time
  • Cell voltages and temperatures can be read in the VictronConnect app and on GX devices
  • Connects to Cerbo GX or Ekrano GX over VE.Can using a standard RJ45 network cable
  • Programmable relay can drive an alarm or control an alternator through its external regulator
  • Supports up to 50 batteries in one system, with up to 384 kWh of storage at 48 V

Specifications

Part number LYN034170310
Brand Victron
Product Lynx Smart BMS 1000 NG (M10)
Battery voltage range 9 – 60 VDC
Maximum input voltage 75 VDC
Main contactor continuous current 1000 A continuous
Main contactor peak current 1200 A for 5 minutes
Standby power Approximately 0.6 W (50 mA at 12 V)
ON mode power Approximately 4.2 W (350 mA at 12 V), depending on the state of the relays
AUX output 1.1 A continuous, protected by resettable fuse
Alarm relay (SPDT) 2 A at 60 VDC
Allow-to-charge and allow-to-discharge ports 0.5 A at 60 VDC each, protected by resettable fuse
Reverse polarity protection No
Busbar M10, torque 33 Nm
VE.Can RJ45
I/O Removable multi-connector with screw terminals
Enclosure material ABS
Enclosure dimensions (H x W x D) 230 x 180 x 100 mm
Unit weight 2.7 kg
Operating temperature range -40 °C to +60 °C
Storage temperature range -40 °C to +60 °C

Compatibility

  • Victron LYN034170310 is designed for the Lithium NG batteries from Victron (LiFePO4)
  • Supported system voltages: 12, 24, or 48 V
  • Busbar is M10 and can be combined with all M10 Lynx products
  • NMEA 2000 integration requires a VE.Can to NMEA 2000 micro-C male cable

“