Description
The Victron LYN034160200 is a Lynx Smart battery management system (BMS) built for Victron Lithium Smart Batteries. This 500A version has M8 busbar connections and a built-in 500A contactor that can act as a fall-back safety mechanism or a remote-controllable main system switch. It is part of Victron’s modular Lynx Distribution system.
Features
- Built-in 500A contactor that works as a fall-back safety mechanism and as a remote-controllable main system switch
- Battery monitor that indicates state of charge percentage and more data
- Pre-alarm signal that warns before the system shuts down, for example due to a low cell
- Bluetooth for setup and monitoring with the VictronConnect App, including Instant Readout of key BMS data
- Local and remote monitoring with a Victron GX device, such as the Cerbo GX or Ekrano GX
- Part of Victron’s modular Lynx Distribution system
Specifications
| Part number | LYN034160200 |
| Brand | Victron |
| Product type | Lynx Smart battery management system (BMS) |
| Supply voltage range | 9-58 Vdc |
| Supported system voltages | 12 V, 24 V or 48 V |
| Main safety contactor continuous current rating | 500 A continuous |
| Main safety contactor peak current rating | 600 A for 5 minutes |
| Reverse polarity protection | No |
| Busbar connection | M8 |
| Battery BMS cable connection | Male and female circular 3-pole connector with M8 screw ring |
| VE.Can connection | RJ45 and RJ45 terminator |
| AUX output maximum current rating | 1.1 A continuous, protected by resettable fuse |
| Power consumption in active mode | Approximately 2.6 W (200 mA at 13 V), depending on the state of the relays |
| Power consumption in hibernate or standby mode | Approximately 10.4 mW (0.8 mA at 13 V) |
| Height, overall | 171.6 mm |
| Height, excluding connections | 166.5 mm |
| Width, overall | 184.7 mm |
| Width, excluding connections | 152.4 mm |
| Depth | 80.9 mm |






