Description
The Victron Energy Orion-TR 12/24-15A is an isolated DC converter, model ORI122441110, rated 15A continuous output and 360W at 40°C. It takes a 10-17V input and its output voltage can be adjusted between 20V and 30V. It has screw terminals for the DC connections and weighs 1.8kg.
Features
- Remote on/off removes the need for a high current switch in the input wiring; a low power switch can operate it.
- Output voltage is adjustable, so the unit can also charge a 12V starter or accessory battery in an otherwise 24V system.
- Short circuit proof; units can be paralleled to increase output current, and Victron says an unlimited number can be connected in parallel.
- IP43 protection when installed with the screw terminals oriented downwards.
- Screw terminals; Victron says no special tools are needed for installation.
- The Orion-TR 12/24-15A is listed at 430W continuous output at 25°C and 360W at 40°C, with 88% efficiency.
- Output noise of 2 mV rms and output voltage tolerance of +/- 0.2V.
Specifications
| Part number (MPN) | ORI122441110 |
| UPC | 8719076038878 |
| Input voltage range | 10-17V |
| Nominal output voltage | 12.2V |
| Output voltage adjust range | 20-30V |
| Output voltage tolerance | +/- 0.2V |
| Output noise | 2mV rms |
| Continuous output current at nominal output voltage and 40°C | 15A |
| Maximum output current (10 s) at nominal output voltage minus 20% | 25A |
| Short circuit output current | 40A |
| Continuous output power at 25°C | 430W |
| Continuous output power at 40°C | 360W |
| Efficiency | 88% |
| Off load current | < 100mA |
| Operating temperature range | -20 to +55°C (derate 3% per °C above 40°C) |
| Humidity | Max. 95% non-condensing |
| DC connection | Screw terminals |
| Maximum cable cross-section | 16 mm² (AWG6) |
| Ingress protection | IP43 when installed with screw terminals oriented downwards |
| Weight | 1.8kg |
| Dimensions | 130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch) |
| Safety standard | EN 60950 |
| Emission standards | EN 61000-6-3, EN 55014-1 |
| Immunity standards | EN 61000-6-2, EN 61000-6-1, EN 55014-2 |
| Automotive directive | ECE R10-5 |








