Description
The Victron Energy CCH024060000 is a Centaur 24/60 battery charger for 24 volt batteries, with a 60 amp charge current and three isolated outputs for charging three battery banks. It accepts 90-265 VAC input at 45 to 65 Hz and 90-400 VDC input. Victron Energy describes it as a fully automatic, three-stage charger.
Features
- Three isolated outputs, each able to supply the full rated current, so three battery banks can charge at the same time.
- Auto-ranging AC input: no adjustment is needed across a 90 to 265 Volt input range, at 50 Hz or 60 Hz.
- Also accepts a 90-400 VDC supply, which Victron Energy lists for DC-DC operation.
- Three-stage charging with temperature compensation, and a DIP switch to select settings for flooded lead-acid, gel or AGM batteries.
- Aluminum epoxy powder-coated case with a drip shield and stainless steel fixings.
- Circuit boards have an acrylic coating, which Victron Energy says gives maximum corrosion resistance.
- Temperature sensors reduce output current automatically under extreme conditions, with output short circuit and over temperature protection.
Specifications
| Part number | CCH024060000 |
| Brand | Victron Energy |
| Model | Centaur 24/60 |
| Output voltage | 24 VDC |
| Charge current | 60 A |
| Output banks | 3 |
| Total output ammeter | Yes |
| Input voltage (VAC) | 90 – 265 VAC |
| Input voltage (VDC) | 90 – 400 VDC |
| Input frequency | 45 – 65 Hz |
| Power factor | 1 |
| Charge voltage absorption | 14,3 VDC |
| Charge voltage float | 13,5 VDC |
| Charge characteristic | IUoU (Three stage charging) |
| Recommended battery capacity | 240-600 Ah |
| Temperature sensor | Internal, – 2mV / °C (- 1mV / °F) per cell |
| Forced cooling | Yes, temperature and current controlled fan |
| Protection | Output short circuit, over temperature |
| Operating temp. range | – 20 to 60°C (0 – 140°F) |
| Ignition protected | Yes |
| Humidity (non condensing) | Max 95% |
What’s included
- Centaur battery charger
- Installation hardware
- Owner’s manual
Compatibility
Victron Energy lists a recommended battery capacity of 240-600 Ah. A DIP switch selects the charge and float voltages for flooded lead-acid, gel or AGM batteries.
Warranty
The Victron Energy CCH024060000 comes with a 5-Year Limited Manufacturer’s Warranty from Victron Energy.






