Victron Energy CCH012040000 Centaur 12/40 Battery Charger

$466.71 USD

Victron Energy CCH012040000 Centaur 12/40 is a 12 VDC battery charger with a 40 A charge current. It has three isolated outputs, an auto-ranging 90 – 265 VAC input and three-stage charging with temperature compensation.

Ships from manufacturer within 2 weeks

Description

Victron Energy CCH012040000 is the Centaur 12/40, a 12 VDC battery charger with a 40 A charge current. It has three isolated outputs, so one unit can charge three battery banks at the same time. It accepts 90 – 265 VAC input or a 90 – 400 VDC supply, and uses three-stage charging.

Features

  • Three isolated outputs, each able to supply the full rated current.
  • Auto-ranging 90 – 265 VAC input at 50 or 60 Hz, with no adjustment needed.
  • Also accepts a 90 – 400 VDC supply for AC-DC and DC-DC operation.
  • Three-stage charging: bulk until output drops to 70% of rated amps, then a 4 hour timer before float.
  • Temperature compensation of charge voltage, with a DIP switch to select settings for flooded lead-acid, gel or AGM batteries.
  • Aluminum epoxy powder-coated case with drip shield and stainless steel fixings.
  • Temperature and current controlled fan, with protection against output short circuit and over temperature.

Specifications

Part number CCH012040000
Model Centaur 12/40
Charge current 40 A
Input voltage (VAC) 90 – 265 VAC
Input voltage (VDC) 90 – 400 VDC
Input frequency 45 – 65 Hz
Power factor 1
Charge voltage absorption 14,3 VDC
Charge voltage float 13,5 VDC
Output banks 3
Total output ammeter Yes
Charge characteristic IUoU (three stage charging)
Recommended battery capacity 160 – 400 Ah
Temperature sensor Internal, -2 mV/°C (-1 mV/°F) per cell
Forced cooling Yes, temperature and current controlled fan
Protection Output short circuit, over temperature
Ignition protected Yes
Operating temp. range -20 to 60°C (0 – 140°F)
Humidity (non condensing) Max 95%

What’s included

  • Centaur battery charger
  • Installation hardware
  • Owner’s manual