Description
Victron Energy BAT524110740 is a 24V, 100Ah lithium battery from the Lithium SuperPack NG line, built on LiFePO4 (LFP) chemistry. Victron designs it as a drop-in replacement for lead-acid batteries in mobile, marine and industrial systems, including off-grid setups that run high-demand appliances. Its form factor and terminal layout are meant to make swapping in a battery straightforward, and no extra parts are needed to install it.
Features
- Integrated Battery Management System (BMS) keeps energy flow within safe operating limits, with internal cell balancing.
- Self-resetting circuit breaker lets charging and discharging be interrupted independently of each other.
- Victron lists continuous discharge up to 2C and continuous charge up to 1C, which can reduce the need to oversize the pack.
- Bluetooth interface for real-time monitoring and control through VictronConnect.
- On/off push button disables both charging and discharging; an internal switch disconnects the battery on over-discharge or high temperature.
- Two LEDs show Bluetooth connectivity, warning and alarm conditions, and firmware update status.
- Self-heating function: in charger mode it warms the cells when they drop below 0 °C during charging (default setting).
- Enclosure rated IP65, protecting against dust ingress and low-pressure water jets from any direction.
Specifications
| Part number | BAT524110740 |
| Product line | Lithium SuperPack NG |
| Chemistry | Lithium Iron Phosphate (LiFePO4 or LFP) |
| Nominal voltage | 24V |
| Capacity | 100Ah |
| Ingress protection | IP65 battery enclosure |
| Self-discharge when switched off | Less than 3% per month, per Victron |
| Self-heating activation (charger mode, default) | Cell temperature below 0 °C during charging |
| External Feedback Signal (EFS) | Battery voltage signal limited to 250 mA |
| Bluetooth | Integrated, controlled through VictronConnect |
| Dimensions | 22″ L × 10″ W × 10″ H |
What’s included
- Mounting brackets, for secure fixing on all three axes.
Compatibility
Height is listed as compatible with the BCI Group 49 standard, allowing replacement in standard battery compartments. Victron Energy BAT524110740 units can be connected in parallel, but a series connection is not allowed. Victron advises that total system current should not exceed the maximum current a single battery can safely interrupt.
“








