Description
The Victron CYR020230430 (Cyrix-Li-Charge 24/48-230) is a charge relay that switches a battery charger on and off for lithium batteries. It is designed for compatible 24V and 48V LiFePO4 systems and responds to the control signal from a battery management system, stopping charging when cell overvoltage or excessive temperature calls for protection.
Features
- Rated for 230A continuous current
- 80A breaking capacity at 48V, a separate figure from the continuous rating
- Engages when the control input is high and disengages when it floats or is pulled low
- Connects the charger after a short delay once the BMS permits charging, charger-side voltage is sufficient and the battery is connected
- Disengages immediately if the control input floats because of cell overvoltage or overtemperature protection
- Reconnects after the protection condition resets; repeated attempts add a longer delay to avoid rapid cycling
- LED indication for engaged, disengaged, connecting, disconnecting and alarm states
- Current consumption under 4mA while open; IP54 enclosure
Specifications
| Manufacturer | Victron Energy |
| Model | Cyrix-Li-Charge 24/48-230 |
| Part number | CYR020230430 |
| Product type | BMS-Controlled Intelligent Charge Relay |
| System voltage | 24V / 48V |
| Continuous current | 230A |
| Breaking capacity at 48V | 80A |
| 24V charger-side connect threshold | 27.4V or higher |
| 48V charger-side connect threshold | 54.8V or higher |
| 24V low-voltage delayed disconnect threshold | Below 27V – 1 Hour Delay |
| 48V low-voltage delayed disconnect threshold | Below 54V – 1 Hour Delay |
| Minimum battery-side voltage for connection | 2V |
| Initial charger connection delay | 3 Seconds |
| Control input | High = Engage; Free-Floating / Low = Disengage |
| Current consumption when open | <4mA |
| LED status indicator | Yes |
| Protection category | IP54 |
| Dimensions (H × W × D) | 2.6 × 4.0 × 2.0 in |
| Primary application | BMS-Controlled Battery Charger Connection / Disconnection |
What’s included
The relay comes with a control cable.
Compatibility
The Victron CYR020230430 is designed for compatible 24V and 48V LiFePO4 battery systems. It works with the control signal from a compatible battery management system.
Listed uses include marine energy systems, RV and mobile power systems, and off-grid battery systems where a charger cannot be controlled directly by the battery management system.
“






