Description
The Victron CCH024040000 is a Centaur battery charger with a 24 VDC, 40AMP output and three isolated outputs, so it can charge three battery banks at once. The aluminum casing has an epoxy powder coat, a drip shield and stainless steel fixings, and the charger accepts 120/240 VAC input and a 90-400 V DC supply.
Features
- Aluminum casing with an epoxy powder coat, a drip shield and stainless steel fixings
- Victron says the acrylic coating on the circuit boards gives maximum corrosion resistance
- Temperature sensors can reduce output current automatically in extreme environmental conditions to keep power components within specified limits
- Accepts 90-265 V AC input at 50 Hz or 60 Hz with no adjustment needed
- Also accepts a 90-400 V DC supply, for AC-DC and DC-DC operation
- Three isolated outputs, each able to supply the full rated current, to charge three battery banks at the same time
- Three-stage charging: bulk until output falls to 70% of rated amps, then a 4 hour timer, then float
- Charge voltage is temperature compensated at -2 mV/°C (-1 mV/°F) per cell; a DIP switch selects settings for flooded lead-acid, gel or AGM batteries
Specifications
| Model | Victron CCH024040000 |
| Part number | CCH024040000 |
| UPC | 8719076021568 |
| Charger output voltage | 24 VDC |
| Charger output current | 40AMP |
| Charging banks | 3 isolated outputs |
| Charging stages | Three-stage |
| Charger input voltage | 120/240 VAC |
| Input range | 90-265 V AC, 50 Hz or 60 Hz |
| DC supply range | 90-400 V DC |
| Battery types | Flooded lead-acid, gel or AGM (selected by DIP switch) |
| Temperature compensation | -2 mV/°C (-1 mV/°F) per cell |
| Portable | No |
| Box dimensions | 9″H x 14″W x 25″L |
| Weight | 22.45 lbs |
Warnings
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.












