Description
The Centaur Charger 12/50(3) 120-240V from Victron is a 12 V battery charger with a nominal charge current of 50 A and three isolated charge outputs. It uses a fully automatic three stage charge characteristic and an auto-ranging AC input covering 90-265 VAC at 50/60 Hz. The three isolated outputs are intended for multi-battery configurations, and the enclosure is aluminium.
Features
- Auto-ranging AC input covering 90-265 VAC at 50/60 Hz; Victron says full output power is kept across the entire range.
- Fully automatic three stage charge characteristic.
- Three isolated charge outputs for multi-battery configurations.
- Charge voltages selectable via DIP switches.
- Internal temperature sensor with adjustable temperature compensation of -12 mV/°C.
- Protections against output short-circuit and over temperature.
- Nominal charge current of 50 A on a 12 V nominal battery voltage.
Specifications
| Part number | CCH012050000 |
| UPC/EAN | 8719076021506 |
| Nominal battery voltage | 12 V |
| Nominal charge current | 50 A |
| Number of charge outputs | 3 |
| Charge algorithm | IUoU, three stage charging |
| Charge voltage absorption | 14.3 V |
| Charge voltage float | 13.5 V |
| Recommended battery capacity | 200-500 Ah |
| AC input voltage range | 90-265 V |
| AC input frequency range | 45-65 Hz |
| AC input voltage | 120 V – 240 V |
| Operating temperature range | -20 to 60 °C |
| Output temperature derating | Up to 40°C (100°F) ambient. Output will reduce to approximately 80% of nominal at 50°C (120°F) and 60% of nominal at 60°C (140°F). |
| Temperature compensation (adjustable) | -12 mV/°C |
| Protections | Output short-circuit, over temperature |
| Battery connection terminal type | M8 bolts |
| AC connection terminal type | Screw-clamp 4 mm² (AWG 6) |
| Protection category | IP20 |
| Material | Aluminium |
| Colour | Blue (RAL 5012) |
| Dimensions (W x D x H) | 239 mm x 110 mm x 437 mm |
| Weight | 5 kg |
| Emission and immunity standards listed | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 |
| Safety standards listed | EN-IEC 60335-1, EN-IEC 60335-2-29, UL 1236 |
Warranty
Victron lists a 5-year standard warranty and global repair service for this charger.






