Victron BPP900100200 CCGX WiFi Module Simple Nano USB

$21.89 USD

Victron BPP900100200 is the CCGX WiFi module simple in Nano USB form, a USB Wi-Fi dongle for the Color Control GX, which has no built-in WiFi. It supports WEP, WPA and WPA2 networks on the 2.4 GHz band.

Ships from manufacturer within 2 weeks

SKU: BPP900100200 Category: Tags: , Brand:

Description

Victron BPP900100200 is the CCGX WiFi module simple in Nano USB form. The Color Control GX has no built-in WiFi, so this USB dongle plugs into the CCGX to connect it to a wireless network. Victron lists it among its supported USB WiFi dongles for the CCGX.

WiFi is one of several ways Victron describes for connecting a CCGX to the internet, alongside an ethernet cable, the GX LTE 4G and USB tethering from a phone. An internet connection lets the CCGX send data to the VRM Portal and check for new firmware.

Features

  • Plugs into the CCGX as a USB Wi-Fi dongle, as the CCGX has no built-in WiFi.
  • Connects to WEP, WPA and WPA2 secured networks.
  • Set up from the CCGX WiFi menu: select a network and enter its password.
  • With several known networks, the CCGX picks the strongest and switches to a stronger one if the signal weakens.
  • WPS (WiFi Protected Setup) setup is not supported.
  • USB 2.0 interface, with 802.11n, 802.11g and 802.11b at 2.4 GHz.
  • Victron says WiFi is less reliable than ethernet, so ethernet should be preferred when possible, and signal strength should be at least 50%.

Specifications

Part number BPP900100200
Product CCGX WiFi module simple (Nano USB)
Brand Victron Energy
Interface USB 2.0
Wi-Fi standards 802.11n, 802.11g, 802.11b
Frequency band 2.4 GHz
Network security supported WEP, WPA and WPA2
WPS setup Not supported
Used with Victron Color Control GX (CCGX)

Supported USB WiFi dongles

Victron lists this module among its supported USB WiFi dongles for the CCGX. Victron says other WiFi dongles may work but have not been tested, and it does not offer support for them.