Victron BMV-700 Battery Monitor BAM010700000 with 500 A Shunt

$98.09 USD

=

Victron BMV-700 Battery Monitor BAM010700000 reads state of charge and volts, amps and amp hours for a single battery bank. It has a 500 A / 50 mV shunt, a 6.5 to 95 VDC supply range, and visual and audible alarms.

Ships from manufacturer within 2 weeks

SKU: BAM010700000 Category: Tags: , , Brand:

Description

The Victron BMV-700 Battery Monitor (BAM010700000) measures the current moving into and out of a battery bank and works out its state of charge. It shows volts, amps, amp hours and time to go for one battery bank, and it keeps historic data such as the number of cycles and the deepest discharge. A 500 A / 50 mV shunt is included, and the monitor is designed for flush-mount installation.

Features

  • Monitors volts, amps, amp hours and time to go for a single battery bank.
  • Reads state of charge as percentage remaining and as amp hours remaining.
  • Shunt rated 500 A / 50 mV, included with the monitor.
  • Supply voltage range of 6.5 to 95 VDC.
  • Programmable visual and audible alarms.
  • The bezel can be removed to suit a round or square display face.
  • Keeps historic data, including battery efficiency, average and deepest discharge, number of cycles, and overvoltage and undervoltage alarms.
  • VE.Direct communication port, and a relay rated 60V/1A normally open (function can be inverted).

Specifications

Model BMV-700
Part number BAM010700000
Supply voltage range 6.5 to 95 VDC
Battery capacity up to 9999 Ah
Shunt 500 A / 50 mV
Current draw, backlight off < 4 mA
Relay 60V/1A normally open (function can be inverted)
VE.Direct communication port Yes
Installation Flush mount
Front bezel 69 x 69 mm (2.7 x 2.7 inch)
Front face diameter 63 mm
Body diameter 52 mm (2.0 inch)
Body depth 31 mm (1.2 inch)
Operating temperature range -20 to +50°C (0 to 120°F)
Cable 10 m, 6 core UTP with RJ12 connectors

What’s included

  • Meter body
  • Retaining nut for mounting the meter when there is access from behind
  • Face plate, mounting screws and snap-on bezel for mounting when there is no access from behind
  • Shunt with circuit board
  • 10 m interconnecting cable with RJ12 plug ends
  • One power cable with fuse
  • Instruction manual
  • Quick install sheet

Not included: a length of battery cable to run between the shunt and the battery.