Description
Victron BAT512120740 is the 12.8 V, 200 Ah version of the Lithium SuperPack NG, a LiFePO4 battery that Victron designs as a drop-in replacement for lead-acid batteries. It has a built-in battery management system, so no external BMS is needed. It is rated IP65.
Features
- Built-in battery management system (BMS); no external BMS required
- Integrated self-heating, with charging allowed down to -30 °C
- Discharge currents up to 2C, which Victron says lets it deliver twice its rated output
- Integrated on/off switch for storage of up to six months without a recharge
- Monitoring and configuration through the VictronConnect app
- Integrated 3/4″ threaded safety vent for connecting to extraction piping in enclosed installations
- Two integrated LEDs show Bluetooth connectivity, warnings, alarms and firmware update notices
Specifications
| Part number | BAT512120740 |
| UPC/EAN | 8719076076414 |
| Nominal voltage | 12.8 V |
| Nominal capacity at 25°C (77°F), discharge current ≤1C | 200 Ah |
| Nominal energy at 25°C (77°F) | 2,560 Wh |
| Chemistry | Lithium Iron Phosphate (LiFePO4 or LFP) |
| Built-in BMS | Yes |
| Maximum continuous charge current | 200 A |
| Maximum continuous discharge current | 400 A |
| End of discharge voltage | 11.2 V |
| Round trip efficiency | 93 % |
| Cycle design life at 80% discharge (capacity ≥80% of nominal) | 2,500 cycles |
| Capacity loss per 100 cycles, at 25 °C, 100 % DoD | 1 % |
| Operating temperature range when charging | -30 °C to 60 °C |
| Operating temperature range when discharging | -30 °C to 60 °C |
| Storage temperature range | -40 °C to 65 °C |
| Maximum storage time when fully charged at 25°C (77°F) | 1 y |
| Protection category | IP65 |
| Width | 198 mm |
| Height | 173 mm |
| Depth | 466 mm |
| Weight | 20.5 kg |
| Battery terminals | M8 female 20mm including nut screws |
| Mounting orientation | Upright or on its side (providing the terminals do not face downward) |
| Parallel configuration | Yes, Unlimited |
Standards
- Transportation: UN 38.3
- Automotive: ECE R10-7
- Cell safety: IEC 62619, UL 1973, UL 9540A
- Battery safety: IEC 62619 (pending)
- Performance: IEC 62620 (pending)
- EMC: EN-IEC 61000-6-3, EN-IEC 61000-6-2
Compatibility
The Victron BAT512120740 works with the VictronConnect app, which connects to it and to other Victron devices in a system. It is BCI Group 49 compatible. If it is charged directly from an alternator, a current limiter may be needed, because LiFePO4 batteries accept higher currents than lead-acid batteries and can overload an alternator whose maximum output is too low.
Warranty
Victron’s page lists a 5-year standard warranty and global repair service.
`








