Stabond U148ECO 2 Part PVC/HYPALON Adhesive

Price range: $42.00 USD through $809.05 USD

Stabond U148ECO is a high-solids, low-VOC, brushable elastomeric contact adhesive. It gives strong bonds to plastics and synthetic rubbers including PVC, Hypalon, neoprene and ABS. Applied in a thin film, with ultimate adhesion in 24 hours.

SKU: U148ECO Categories: , Tags: , Brand:

Description

Stabond U148ECO replaces the 2 Part UK-148 Adhesive.

STABOND U148ECO is a high-solids, low-VOC, brushable, single component elastomeric contact adhesive which provides high strength bonds to many plastics and synthetic rubbers such as SBR, Neoprene, Nitrile, PVC, ABS, rigid urethane foam, and Hypalon.

Application: Stabond U-148 ECO is formulated for brush application. Surfaces to be bonded must be free of dirt, oil, and grease. Clean the substrate

with a solvent such as acetone or MEK. Lightly abrading the substrate will improve the bond. Apply a thin uniform film to each substrate

and allow 5-10 minutes for the solvent to flash off. Apply sufficient pressure to insure intimate contact. Immediate bond strength

permits handling and ultimate adhesion develops within 24 hours.

Properties:

TYPE: SYNTHETIC ELASTOMER

CURE TIME: 48 HOURS

APPEARANCE: CLEAR LIQUID

PEEL STRENGTH: ≥ 8 PIW

SOLIDS: 28%

THINNER: STABOND C THINNER

SHELF LIFE: 1 YEAR

FLASH POINT: 28°F

WT/GAL: 7.2 LBS

VISCOSITY: 1500 CPS

Storage: For maximum shelf life, store material in a cool, dry area and keep container tightly sealed. Storage temperatures of 60-80°F are recommended. Lower storage temperature will cause a temporary increase in viscosity

Additional information

Size

4oz, 8oz, 16oz Pint, 32oz Quart, 5 Gallon Pail