Simrad 000-10907-001 Type S Rotary Helm Drive

$1,448.43 USD

The Simrad 000-10907-001 Type S Rotary Helm Drive adds autopilot steering to smaller powerboats with mechanical push-pull cable steering. It replaces the manual helm and sits concealed behind the dash.

Ships from manufacturer within 2 weeks

SKU: NAV000-10907-001 Categories: , Tags: , Brand:

Description

The Simrad 000-10907-001 is a rotary mechanical autopilot drive for smaller powerboats fitted with mechanical push-pull cable steering. It includes a drive motor, solenoid clutch and integrated frequency rudder feedback (RFB) capability, and it replaces the existing manual steering helm. The unit sits completely hidden behind the dash for a tidy installation.

Features

  • Replaces the existing manual steering helm on boats with mechanical push-pull cable steering.
  • Includes a drive motor, solenoid clutch and integrated frequency rudder feedback (RFB) capability.
  • Mounts totally concealed behind the dash.
  • Suits standard straight shaft configurations.
  • Built on the Morse 290 rotary helm unit, it accepts Morse 304411 and Teleflex SSC52 rotary cables without modification.
  • Produces a maximum cable push/pull of 136 kg.

Specifications

Brand Simrad
Part Number 000-10907-001
UPC 9420024121153
Type Rotary mechanical autopilot drive
Steering system Mechanical push-pull cable
Shaft configuration Standard straight shaft
Maximum cable push/pull 136 kg
Recommended maximum boat speed 65 km/h (40 mph)
Steering load limit 7 kg force on the rim of a 35 cm diameter steering wheel to hold a course (1.2 kgm of torque)
Autopilot computers NAC-3, legacy AC12/42
Rotary cables accepted without modification Morse 304411, Teleflex SSC52
Base unit Morse 290 rotary helm unit

Compatibility

Check these points against your boat before fitting the Simrad 000-10907-001.

  • Suitable for use with NAC-3 and legacy AC12/42 autopilot computers.
  • Recommended for boats with a maximum speed of 65 km/h (40 mph). Should not be fitted to boats that can exceed this speed.
  • Should not be fitted to boats where the engine max horsepower exceeds the max horsepower rating on the boat manufacturer’s tag.
  • Teleflex Safe T, Teleflex Big T, Uflex T71, Uflex T73NR or Uflex T81 steering: a cable adapter must be fitted to the cable before installing the drive.
  • Rack and pinion steering: the drive can be used, but the steering cable must also be replaced with a Morse 304411 or Teleflex SSC52.
  • If steering wheel input torque exceeds 7 kg force on the rim of a 35 cm diameter steering wheel (1.2 kgm of torque), a hydraulic linear actuator drive system is recommended.
  • Non feedback (NFB) steering: the drive can be fitted, but the helm person should be formally familiarized with the new helm’s operating characteristics.