Raritan 21S1524 Hold n’ Treat Waste Treatment System, 24V

$6,027.61 USD

Raritan 21S1524 Hold n’ Treat Waste Treatment System, 24V, combines a 15 gallon holding tank with an Electro Scan Type I treatment unit. It holds waste in no discharge areas, treats it in other waters and is fully lockable.

Ships from manufacturer within 2 weeks

SKU: RAR21SR1524 Category: Tags: , Brand:

Description

The Raritan 21S1524 Hold n’ Treat Waste Treatment System, 24V, is a boat sanitation system with a 15 gallon holding tank and an Electro Scan Type I treatment unit. It keeps waste in the tank in sensitive or no discharge areas and treats and discharges it through a Type I MSD in all other waters. Its stated use is coastal cruising boats that move in and out of No Discharge areas, sensitive waters or marinas.

Features

  • Holds waste in the 15 gallon tank in sensitive or no discharge areas
  • Treats and discharges waste through a Type I MSD in all other waters
  • Three-choice control panel: No Discharge (holding only), Automatic (factory pre-set processing) or Manual (user-activated processing)
  • Warning light when the tank is almost full
  • Fully lockable to prevent discharge of treated sewage in no discharge zones
  • Where discharge is permitted, Raritan says it satisfies all regulations for U.S. waters, and only treated waste is discharged
  • Complete drop-in-place system that eliminates trips to the pump-out station
  • Raritan says it is small enough for installation on almost any vessel

Specifications

Brand Raritan
MFG # (model) 21S1524
UPC / barcode 085462024283
Type Hold n’ Treat Sanitation System – “R” Model
Volts 24V
Holding tank 15 gallon
Transfer pump Macerator
Treatment unit Electro Scan Type I
Controller Electronic controller
Control panel 3-choice
Dimensions (with integral Electro Scan unit) 26″L x 18-1/2″W x 18-1/4″H

What’s included

The system consists of:

  • 15 gallon holding tank with a macerator transfer pump
  • Electro Scan Type I treatment unit
  • Electronic controller
  • Three-choice control panel

Not included: Treatment Unit Cover, MFG # 31-101W, which is listed separately on the source page.

Retrofitting older units

The functions of the Hold n’ Treat can be retrofitted to older Electro Scan, Lectra/San and Purasan Type I MSDs by adding the correct control kit and panel, along with some modifications. The source page says to call for assistance with a retrofit.

Warning

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. www.P65Warnings.ca.gov