Description
The Raritan 172012 Water Heater is a 1700 Series unit with a 20 gal. tank, a 240V electric element and a heat exchanger. It is a compact, insulated tank that sits downstream of the pump in a pressurized water system. When the engine runs, coolant from the engine warms the water through a coil in the tank.
Features
- Glass-lined steel tank inside a polymer jacket; Raritan says the jacket resists corrosion from dampness.
- Heat exchanger coil inside the tank warms the water from engine coolant while underway.
- 240V electric element with an ignition-protected, adjustable thermostat that can be set as high as 160°F.
- Sacrificial magnesium anode, which can be replaced, helps protect the tank.
- High-density, non-CFC foam insulation helps the tank hold hot water longer.
- Four threaded ports, all on one side of the unit: hot and cold 3/4″ male NPT, heat exchanger 3/4″ female NPT.
- A check valve must be fitted in the inlet line or inside the heater to stop hot water flowing back toward the pump.
- Use only metal fittings when plumbing the heater; avoid plastic.
Specifications
| Part number (MFG #) | 172012 |
| Brand | Raritan |
| Series | 1700 Series |
| Volts | 240V |
| Gallons | 20 gal. |
| Heat exchanger | Yes |
| Diameter | 18-3/4″ |
| Height | 24-1/4″ |
| Dockside recovery rate | 13 gallons per hour |
| Recovery rate with 240V heating element | As high as 18 gallons per hour |
| Maximum thermostat setting | 160°F |
| Hot and cold water connections | 3/4″ male NPT |
| Heat exchanger connections | 3/4″ female NPT |
| Threaded ports | Four |
Installation notes
The heater needs a pressurized water system to work. The heat exchanger connection may differ depending on the engine installation.
Warning
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.







