Description
The Pelican 1506 Air Case is part of Pelican’s Long/Deep Series, which combines long and deep protection in one hard case. It is waterproof, crushproof and dustproof, and its polymer body is up to 40% lighter than other polymer cases. The interior takes user-customizable Pick N Pluck™ foam, so you can configure it to fit your gear.
Features
- Waterproof, crushproof and dustproof, rated IP67 & MIL-SPEC certified
- Super-light proprietary HPX²™ polymer, up to 40% lighter
- User-customizable Pick N Pluck™ foam
- Waterproof O-ring seal and automatic pressure equalization valve that balances interior pressure and keeps water out
- Press & Pull™ latches that stay shut under pressure and open only when you need them
- Fold-down over-molded handle
- Stainless steel padlock protectors
- Made in the USA, with a Limited Lifetime Warranty
Specifications
| Model | 1506 |
| SKU | 015060-0000-110 |
| UPC | 019428171100 |
| Colour | Black |
| IP rating | IP67 |
| Weight With Foam | 6.30 lbs (2.86 kg) |
| Weight No Foam | 5.35 lbs (2.43 kg) |
| Exterior dimensions | 20.12 x 12.02 x 8.56″ (51.1 x 30.53 x 21.74 cm) |
| Interior dimensions | 18.70 x 9.40 x 7.80″ (47.5 x 23.88 x 19.81 cm) |
| Int Volume | 0.79ft³ (0.02m³) |
| Lid Depth | 2.00″ (5.08 cm) |
| Bottom Depth | 5.80″ (14.73 cm) |
| Total Depth | 7.80″ (19.81 cm) |
| Buoyancy | 51.69 lbs (23.45 kg) |
| Padlock Hole Diameter | 0.31″ (0.79 cm) |
| Body Material | Proprietary Polypropylene Blend |
| Latch Material | ABS |
| O Ring Material | EPDM |
| Purge Body Material | ABS |
| Purge Vent Material | Hi-Flow Gore-Tex 3 Micron Hydrophobic Non-Woven |
| Purge O Ring Material | 70 Shore Nitrile |
| Minimum Temperature | 0°F (-18°C) |
| Maximum Temperature | 140°F (60°C) |








